The Vortex

Pot still design and discussion

The Vortex

Postby googe » Sat Oct 06, 2012 5:52 pm

Hey all, gave my new pot still a run today, dissapointed with the output :sad: 250ml per 2.20 mins, which = arond 9L an hour, correct me if im wrong?. Did a TPW spirit run, was pulling 87% :dance: , better than the dude at works reflux ha. I did it in a spiral way to try an create a vortex effect providing faster vapor speed. I also added a spirial in the centre of the colum after the first run and i got around a litre more per hour. I just flattened some pipe and twisted it in the vice and jamed it up the colum. The condensor works unreal, with flames slaping the top of the keg it still wasnt huffing or struggling at all. I think the main prob was input to the condensor from the colum, ive got 2" down to 3/4" and into the condensor, if i had some bigger input into the condensor it would kick ass i reckon. The control with this condensor is great!, very precise, the flow is nothing like a reg liebig, its very very constant, no brocken steaam into drops then a stream then god knows what, it just stays on what i set it on. I need a bigger boiler and bigger water supply!. This will be my fav pot still now, produces very nice tasting stuff at high abv :D. Sorry for the crap pics. Its fuckin ugly :laughing-rolling:
You do not have the required permissions to view the files attached to this post.
googe
 

Re: The Vortex

Postby Urrazeb » Sat Oct 06, 2012 8:37 pm

Tidy set up googe! :handgestures-thumbupleft:
Urrazeb
 
Posts: 2340
Joined: Fri Jul 27, 2012 8:42 am
Location: Perth
equipment: Column & pot

Re: The Vortex

Postby mullamulla » Sat Oct 06, 2012 9:16 pm

Good stuff googe, they're always different your creations :handgestures-thumbupleft:
mullamulla
 
Posts: 213
Joined: Thu Aug 02, 2012 8:27 am
equipment: 2" Slant Plate Boka LM
.
-- Loading 2" Pot Still --
[#########------------]

Re: The Vortex

Postby punchy21 » Sat Oct 06, 2012 10:35 pm

Nice work googe! :handgestures-thumbupleft:
punchy21
 
Posts: 619
Images: 0
Joined: Fri Nov 04, 2011 11:56 am
Location: South West
equipment: Modular 4" 4 plate Bubbler
6kW 50L Boiler

Re: The Vortex

Postby Kimbo » Sun Oct 07, 2012 11:56 am

Nice out of the square thinking, well done :handgestures-thumbupleft:

9L/h is pretty good mate ;-)
Kimbo
Lifetime Member
 
Posts: 5461
Images: 0
Joined: Fri Mar 18, 2011 6:33 pm
Location: Perf WA
equipment: 4" bubbler with a 6"inline thumper

Re: The Vortex

Postby googe » Sun Oct 07, 2012 12:13 pm

Thanks fellas :). Still no where near what i want kimbo, will have to do though cause my still making days are over, consuming to much time and effort with these things, plus im not achieveing much lol. I ll stick with this one, love how it runs :).
googe
 

Re: The Vortex

Postby Kimbo » Tue Oct 09, 2012 10:20 pm

googe wrote:Thanks fellas :). Still no where near what i want kimboAdd more heat :handgestures-thumbupleft: , will have to do though cause my still making days are overBullshit, you'll make a few more yet :laughing-rolling: :laughing-rolling: :laughing-rolling: , consuming to much time and effort with these things, plus im not achieveing much lol. I ll stick with this one, love how it runs :).
Kimbo
Lifetime Member
 
Posts: 5461
Images: 0
Joined: Fri Mar 18, 2011 6:33 pm
Location: Perf WA
equipment: 4" bubbler with a 6"inline thumper

Re: The Vortex

Postby googe » Tue Oct 09, 2012 11:57 pm

Did you miss the bit where i said the flames were lapping the top of the keg kimbo? :teasing-neener: i anit gunna put more heat than that into it, was nerve racking enough thanks :))
googe
 

Re: The Vortex

Postby MacStill » Wed Oct 10, 2012 12:45 am

reckon you should rename it to "pigs dick" :laughing-rolling:
MacStill
Lifetime Member
 
Posts: 16835
Joined: Fri Mar 18, 2011 1:40 pm
Location: Wide Bay QLD
equipment: Anything I choose :P

Re: The Vortex

Postby Kimbo » Wed Oct 10, 2012 2:24 pm

McStill wrote:reckon you should rename it to "pigs dick" :laughing-rolling:

I Kimbo Mc Rumrunner, of the Aussie Distiller Clan,hereby Knight thy Still..........."Mr Squiggle"


Mr Quiggle.jpg
You do not have the required permissions to view the files attached to this post.
Kimbo
Lifetime Member
 
Posts: 5461
Images: 0
Joined: Fri Mar 18, 2011 6:33 pm
Location: Perf WA
equipment: 4" bubbler with a 6"inline thumper

Re: The Vortex

Postby googe » Thu Oct 11, 2012 12:52 pm

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
googe
 

Re: The Vortex

Postby mullamulla » Thu Oct 11, 2012 1:00 pm

:laughing-rolling:
mullamulla
 
Posts: 213
Joined: Thu Aug 02, 2012 8:27 am
equipment: 2" Slant Plate Boka LM
.
-- Loading 2" Pot Still --
[#########------------]

Re: The Vortex

Postby crow » Thu Oct 11, 2012 3:18 pm

How it works is all that matters ;-)
crow
 
Posts: 2363
Joined: Tue Mar 13, 2012 1:44 am
Location: Central Highlands Victoria
equipment: ultra pure reflux still and a 4" 4 plate MacStill built copper bubble cap column and a 500mm scoria packed rectifying module

Re: The Vortex

Postby Urrazeb » Thu Oct 11, 2012 3:56 pm

:)) :)) :shock:
Urrazeb
 
Posts: 2340
Joined: Fri Jul 27, 2012 8:42 am
Location: Perth
equipment: Column & pot


Return to Pot Stills



Who is online

Users browsing this forum: No registered users and 77 guests

x