Page 1 of 1
Pot still almost done
Posted:
Thu Oct 18, 2012 8:37 pmby vooharmy
Last of the bits I needed have arrived and ill be sending it to the welder next week to have the element sockets installed. unfortunately the day after it returns ill be moving interstate and wont be running it for another month =(. Here's a pic!
Sent from my GT-N7100 using Tapatalk 2
Re: Pot still almost done
Posted:
Thu Oct 18, 2012 8:53 pmby kelbygreen
nice :P, go get a 3 ring burner and crank that thing ;)
I would be itching to use it, Just build my pot today and cut the hole for the 3" ferrule lol HBS will weld that in tomorrow when I go pick some grain up and might get a vinegar run :D
Looks the goods different how you liebig and capped the column
Re: Pot still almost done
Posted:
Thu Oct 18, 2012 9:15 pmby Sam.
Looks good mate :handgestures-thumbupleft: What sort of keg is that attached to? Obviously its turned upside down but is that the original base for it? :think:
Re: Pot still almost done
Posted:
Thu Oct 18, 2012 9:30 pmby vooharmy
Re: Pot still almost done
Posted:
Thu Oct 18, 2012 9:32 pmby Sam.
Nice job whoever did it for you :handgestures-thumbupleft:
Re: Pot still almost done
Posted:
Thu Oct 18, 2012 9:34 pmby vooharmy
Oh I see what your asking. Its a cub keg with a 4 inch ferrule welded to the bottom along with a 2in fill port. Base removed.
Sent from my GT-N7100 using Tapatalk 2
Re: Pot still almost done
Posted:
Thu Oct 18, 2012 9:37 pmby Merlot
Very nice mate.... :handgestures-thumbupleft: Glad I don't have to wait a month becore my next run :pray:
Re: Pot still almost done
Posted:
Thu Oct 18, 2012 9:38 pmby Sam.
vooharmy wrote:Oh I see what your asking. Its a cub keg with a 4 inch ferrule welded to the bottom along with a 2in fill port. Base removed.
Sent from my GT-N7100 using Tapatalk 2
Yeah looks very schmick mate :handgestures-thumbupleft: :handgestures-thumbupleft:
Re: Pot still almost done
Posted:
Thu Oct 18, 2012 9:42 pmby MacStill
That is a classy looking setup mate, very nice :handgestures-thumbupleft:
Re: Pot still almost done
Posted:
Thu Oct 18, 2012 9:54 pmby vooharmy
Thanks guys! Shame it will be so long before I get to run it! I couldnt of got this far without all the help I got here from mcstill and others!
Sent from my GT-N7100 using Tapatalk 2
Re: Pot still almost done
Posted:
Fri Oct 19, 2012 3:10 pmby Kimbo
Well done Voo, Well done :clap: :clap:
Re: Pot still almost done
Posted:
Fri Oct 19, 2012 4:11 pmby Rucky
Can I ask how much it cost you to get the ferrules welded on?
Re: Pot still almost done
Posted:
Fri Oct 19, 2012 4:15 pmby kelbygreen
cost me nothing :teasing-neener: , not sure what it would cost though if I had to pay some one. Get a few quotes it also would depend if you cut the holes or got them to do it.
Re: Pot still almost done
Posted:
Fri Oct 19, 2012 4:50 pmby vooharmy
I couldnt tell you, it came with them on. Im getting two 1" sockets installed and thats costing me $65.00
Sent from my GT-N7100 using Tapatalk 2