Power controller questions

[WalterWhite]

:silent: I'm a moron! :violence-stickwhack:

[CyBaThUg]

Just in need of some advice for a spirit run of low wines on a 2400 watt element running through a pot what should I run my element on as I have never used a voltage controller before and do I run it flat out till it gets to temp then turn it down or run it on lower temp from the start

[CyBaThUg]

Oh the boiler is a 50ltr keg

[bayshine]

Full power for heat up then adjust it down till you get your desired flow output, my guess would about three drops a second :handgestures-thumbupleft:

[Doubleuj]

Still just run on out put and abv, from what Zac taught me a pot should be run with a steady unbroken stream.
Turn down the controller till you get a broken stream then slowly dial it up till it flows unbroken.
Simple as :handgestures-thumbupleft: that's what I did when I was on the pot, wait, I mean using a pot on a 50L keg and low wines.

[CyBaThUg]

Hahahahahahahaha cheers guys