Custom LM build

Reflux still design and discussion

Re: Custom LM build

Postby Jezza93 » Wed Oct 30, 2019 5:00 pm

I don't think I will need mesh as there 10mm gap between coils and 310mm long if vapour gets pass it I running way to hard I was going to use a little bit of mesh at the top to help locate it tho :-D :handgestures-thumbupleft:
Jezza93
 
Posts: 32
Joined: Tue Sep 10, 2019 9:13 am
equipment: 2 inch Reflux with home made keg boiler gas ring burner for heating

Re: Custom LM build

Postby Jezza93 » Sat Nov 02, 2019 6:20 pm

Finished the condenser holding pipe with tri clamp mounts :handgestures-thumbupleft:
You do not have the required permissions to view the files attached to this post.
Jezza93
 
Posts: 32
Joined: Tue Sep 10, 2019 9:13 am
equipment: 2 inch Reflux with home made keg boiler gas ring burner for heating

Re: Custom LM build

Postby bluc » Sat Nov 02, 2019 6:42 pm

Very nice :handgestures-thumbupleft:
bluc
 
Posts: 6795
Joined: Tue Apr 14, 2015 5:47 pm
Location: sunshine coast
equipment: 2" pot with 2" shotty 400mm long 5x 1/2" on a t500 boiler.
50l keg boiler 4" still mount 4" sight glass 1" drain..
4 plate 4" bubbler, 600mm packed section

Re: Custom LM build

Postby Jezza93 » Sat Nov 02, 2019 8:46 pm

Thanks mate made the rings and pipe for it from pipe and plate :music-deathmetal:
You do not have the required permissions to view the files attached to this post.
Jezza93
 
Posts: 32
Joined: Tue Sep 10, 2019 9:13 am
equipment: 2 inch Reflux with home made keg boiler gas ring burner for heating

Re: Custom LM build

Postby Jezza93 » Sun Nov 03, 2019 7:30 pm

Thermo well for vapour temp probe made a bit of a cover to stop the refluxing liquid fluxuating the temperature, it's upside down in the photo just to see the probe in there

Also got my two kegs and starting to making a sub boiler :handgestures-thumbupleft:
You do not have the required permissions to view the files attached to this post.
Jezza93
 
Posts: 32
Joined: Tue Sep 10, 2019 9:13 am
equipment: 2 inch Reflux with home made keg boiler gas ring burner for heating

Re: Custom LM build

Postby Jezza93 » Tue Nov 05, 2019 5:37 am

My new fermenter up and running :D bubbling away nicely
You do not have the required permissions to view the files attached to this post.
Jezza93
 
Posts: 32
Joined: Tue Sep 10, 2019 9:13 am
equipment: 2 inch Reflux with home made keg boiler gas ring burner for heating

Re: Custom LM build

Postby Jezza93 » Wed Nov 06, 2019 3:54 pm

All back from getting hydroblasted looks so good :happy-partydance: :music-deathmetal: :D
You do not have the required permissions to view the files attached to this post.
Jezza93
 
Posts: 32
Joined: Tue Sep 10, 2019 9:13 am
equipment: 2 inch Reflux with home made keg boiler gas ring burner for heating

Re: Custom LM build

Postby Jezza93 » Thu Nov 07, 2019 10:10 pm

Got the sump, kegs and drain preped also putting a 6 inch sight glass just below the collum output to keep and eye on the wash

Got a S/S junction box with lights and fittings for my element :happy-partydance:
You do not have the required permissions to view the files attached to this post.
Jezza93
 
Posts: 32
Joined: Tue Sep 10, 2019 9:13 am
equipment: 2 inch Reflux with home made keg boiler gas ring burner for heating

Re: Custom LM build

Postby bluc » Thu Nov 07, 2019 10:19 pm

Whats hydroblasting?
bluc
 
Posts: 6795
Joined: Tue Apr 14, 2015 5:47 pm
Location: sunshine coast
equipment: 2" pot with 2" shotty 400mm long 5x 1/2" on a t500 boiler.
50l keg boiler 4" still mount 4" sight glass 1" drain..
4 plate 4" bubbler, 600mm packed section

Re: Custom LM build

Postby Jezza93 » Fri Nov 08, 2019 5:58 am

Is like a dustless blaster but polishes

Here's a link to website https://www.vaporblastingequipment.com/ ... ng-process

Does a really good job had a mate that has a machine at home :handgestures-thumbupleft:
Jezza93
 
Posts: 32
Joined: Tue Sep 10, 2019 9:13 am
equipment: 2 inch Reflux with home made keg boiler gas ring burner for heating

Re: Custom LM build

Postby Jezza93 » Mon Nov 11, 2019 9:51 pm

The Start of my boiler coming together lot of work to get everything to fit right :handgestures-thumbupleft:
You do not have the required permissions to view the files attached to this post.
Jezza93
 
Posts: 32
Joined: Tue Sep 10, 2019 9:13 am
equipment: 2 inch Reflux with home made keg boiler gas ring burner for heating

Re: Custom LM build

Postby woodduck » Tue Nov 12, 2019 6:05 am

Nice one. Looking good :handgestures-thumbupleft:
woodduck
Moderator
 
Posts: 3292
Joined: Mon Jun 16, 2014 5:54 pm
Location: Good old country SA
equipment: 4 plate 6" copper bubbler, 6 plate 4" glass bubbler with 500mm packed section three way thumper sitting on a 50 ltr keg boiler with 6000watts, 2" pot still and a 2" boka.

Re: Custom LM build

Postby Jezza93 » Tue Nov 12, 2019 9:36 pm

6 inch sight glass just need to drill and tap holes for the countersunk bolts
You do not have the required permissions to view the files attached to this post.
Jezza93
 
Posts: 32
Joined: Tue Sep 10, 2019 9:13 am
equipment: 2 inch Reflux with home made keg boiler gas ring burner for heating

Re: Custom LM build

Postby Jezza93 » Thu Nov 14, 2019 10:26 pm

Finished the sight glass had to drill and tap countersunk bolts and make a blue silicone gasket and weld pipe with a fish mouth :smile: :handgestures-thumbupleft:
You do not have the required permissions to view the files attached to this post.
Jezza93
 
Posts: 32
Joined: Tue Sep 10, 2019 9:13 am
equipment: 2 inch Reflux with home made keg boiler gas ring burner for heating

Re: Custom LM build

Postby Jezza93 » Thu Nov 14, 2019 10:31 pm

Mock up of my elements and junction box in my sump, should work well :handgestures-thumbupleft: p.s that little cardboard box is to hold the element it's not staying there
You do not have the required permissions to view the files attached to this post.
Jezza93
 
Posts: 32
Joined: Tue Sep 10, 2019 9:13 am
equipment: 2 inch Reflux with home made keg boiler gas ring burner for heating

Re: Custom LM build

Postby Jezza93 » Thu Nov 14, 2019 10:34 pm

Just a size comparison from what I have to what I am going to :D :handgestures-thumbupleft: :music-deathmetal:
You do not have the required permissions to view the files attached to this post.
Jezza93
 
Posts: 32
Joined: Tue Sep 10, 2019 9:13 am
equipment: 2 inch Reflux with home made keg boiler gas ring burner for heating

Re: Custom LM build

Postby db1979 » Fri Nov 15, 2019 8:18 am

Looking good :happy-partydance:
db1979
Mentor
 
Posts: 1347
Joined: Sat Dec 29, 2012 3:47 pm
Location: South of the big smoke in banana bender land.
equipment: Eve - 4" x 4 plate solid state bubbler (sieve plates), 330 mm packed section on a keg boiler with 2 x 2000 W elements.
Virtually retired: 2" x 4 plate solid state bubbler (1" bubble caps, no sight glasses)

Previous

Return to Reflux Stills



Who is online

Users browsing this forum: Google [Bot], Jezza93 and 5 guests

x