5 Star Store
Community Guidelines
Newbies Corner
Recipes
AD searchNearly finished
11 posts
• Page 1 of 1
Nearly finished
by Fatguts » Fri Mar 08, 2019 9:00 pm
]Been working on these in my spare time and have finally got the majority of them finished. I still need to modify the keg and fit some heating elements. Also need to fit some water connections to the liebig and dephlag. A big thanks to FSD for all the ferrules, clamps, chupa chups, bottle openers etc. Did a vinegar run on both of them today using the T500. Surprisingly, I only had 1 leak and the T500 lid handled the weight of the modular without incident. Its a long weekend here in SA so im hoping to fit the water connectors and do a sacrificial run...got a couple of TPW ready to go.
You do not have the required permissions to view the files attached to this post.
- Fatguts
- Posts: 43
- Joined: Tue Dec 18, 2018 8:55 am
- Location: Adelaide
- equipment: 4", 4 plate glasser and a 2" all copper reflux still with a 2 meter packed column, 500 mm shotgun condenser and homemade parrot, all sitting on a 50 litre upside down beer keg boiler with 2 X 2400W elements.
- bluc
- Site Donor
- Posts: 8968
- Joined: Tue Apr 14, 2015 5:47 pm
- Location: sunshine coast
- equipment: 2" pot with 2" shotty 400mm long 5x 1/2" on a t500 boiler.
50l keg boiler 4" still mount 4" sight glass 1" drain..
4 plate 4" bubbler, 600mm packed section
Re: Nearly finished
by bluc » Fri Mar 08, 2019 9:10 pm
Any reason for two builds ccvm and pot wouldn't ccvm cover both?
- bluc
- Site Donor
- Posts: 8968
- Joined: Tue Apr 14, 2015 5:47 pm
- Location: sunshine coast
- equipment: 2" pot with 2" shotty 400mm long 5x 1/2" on a t500 boiler.
50l keg boiler 4" still mount 4" sight glass 1" drain..
4 plate 4" bubbler, 600mm packed section
Re: Nearly finished
by db1979 » Fri Mar 08, 2019 9:12 pm
I'm seeing some lime wedges with vodka and soda in your near future. :handgestures-thumbupleft:
- db1979
- Posts: 1760
- Joined: Sat Dec 29, 2012 3:47 pm
- Location: South of the big smoke in banana bender land.
- equipment: Eve - 4" x 4 plate solid state bubbler (sieve plates), 330 mm packed section on a keg boiler with 2 x 2000 W elements.
Currently having a makeover: 2" x 4 plate solid state bubbler (1" bubble caps, no sight glasses...maybe not for much longer!) on a bain-marie boiler.
- bluc
- Site Donor
- Posts: 8968
- Joined: Tue Apr 14, 2015 5:47 pm
- Location: sunshine coast
- equipment: 2" pot with 2" shotty 400mm long 5x 1/2" on a t500 boiler.
50l keg boiler 4" still mount 4" sight glass 1" drain..
4 plate 4" bubbler, 600mm packed section
Re: Nearly finished
by Fatguts » Fri Mar 08, 2019 9:28 pm
bluc wrote:Any reason for two builds ccvm and pot wouldn't ccvm cover both?
I knew someone would ask that question! Yes the ccvm will cover both but im going to keep the T500 so i thought id make it a bit more useful.
- Fatguts
- Posts: 43
- Joined: Tue Dec 18, 2018 8:55 am
- Location: Adelaide
- equipment: 4", 4 plate glasser and a 2" all copper reflux still with a 2 meter packed column, 500 mm shotgun condenser and homemade parrot, all sitting on a 50 litre upside down beer keg boiler with 2 X 2400W elements.
Re: Nearly finished
by Fatguts » Fri Mar 08, 2019 9:35 pm
db1979 wrote:I'm seeing some lime wedges with vodka and soda in your near future. :handgestures-thumbupleft:
Your making me thirsty. :))
- Fatguts
- Posts: 43
- Joined: Tue Dec 18, 2018 8:55 am
- Location: Adelaide
- equipment: 4", 4 plate glasser and a 2" all copper reflux still with a 2 meter packed column, 500 mm shotgun condenser and homemade parrot, all sitting on a 50 litre upside down beer keg boiler with 2 X 2400W elements.
- Professor Green
- Posts: 2484
- Joined: Fri Apr 17, 2015 1:10 pm
- Location: Victoria
- equipment: FSD 100 litre milk can with 2 x 2400W elements
FSD Neutraliser
FSD Carter Head
12 litre double boiler with 2400W element
Re: Nearly finished
by Mitcon » Sat Mar 09, 2019 11:27 am
Those are things of beauty, they look fantastic. Nice work :handgestures-thumbupleft:
- Mitcon
- Posts: 41
- Joined: Sat Jan 26, 2019 5:18 pm
- Location: Southern Adelaide
- equipment: Stainless Steel T500 with 25L boiler and a 50L keg waiting
Re: Nearly finished
by Lowie » Sat Mar 09, 2019 3:35 pm
Looks the goods fatguts. :handgestures-thumbupleft:
- Lowie
- Posts: 712
- Joined: Sun May 24, 2015 1:32 pm
- Location: Crow eater
- equipment: 4", 4 plate "Frankenfurter" copper bubbler and blockhead on a 50L 3000W electric boiler, 10000W controller - don't even know why I need that much, all grain HERMS system through 18G HLT keg and 50L mash tun.
Re: Nearly finished
by dans.brew » Sat Mar 09, 2019 4:37 pm
Very nice work there mate! You've certainly got them sparkling! :handgestures-thumbupleft:
You'll need pleanty of storage when you get them both cranking.
You'll need pleanty of storage when you get them both cranking.
- dans.brew
- Posts: 987
- Joined: Fri Oct 07, 2016 10:26 pm
- Location: Victoria- Northern Wimmera
- equipment: Pure Distilling Reflux Still
2" Pot Still with lieberg
4" x 4 plates Bubbler with 2"bubble caps on 50ltr keg boiler
11 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 10 guests