My VM still build

[jdonly1]

Yeh well the still is finished and should work a treat, it takes a long time to get 150L of feints to run through it though, well that and the fact I gotta get my arse into gear and get a boiler sorted for it.

At the moment I'm prioritizing things, got a heap of small jobs to do for people before I start on my own things again ;)

Cheers.

Send it down here mate,I will run it for you :mrgreen: :mrgreen: :mrgreen: :mrgreen:

No worries just deposit $1100 to cover freight and you can use it as long as you want ;) ;) :lol:

I can get freight alot cheaper than that :mrgreen: $1100 Hmmm still worth considering ;)
Unlimited use of a 4' VM. :o
Im actually waiting to see how yours preforms as to weather I go 4" or 3",waiting,waiting waiting lol

[MadsF]

Did you actually run it? Cause it hasn`t been made any new post etc ;)
What kind of takeoff speeds did you get during hearts?

I`m wandering, cause I`m planning a 4" VM, pretty much that same as the one you built, only in SS.

[MacStill]

... much to JD's horror I cut it up and made a couple of bubblers out of it before I finished the build :laughing-rolling:

[MadsF]

Too bad ;)

What do you think of a 15 perforated plate VM, with LM for heads extraction, in a 4" column? I`m thinking of 4" between each plate?
Any pitfalls i should know about?

Thanks

[MacStill]

What do you think of a 15 perforated plate VM

I think that would be one hell of a still :dance:

[MadsF]

Oh it will be 8-)
But is 4" enough between the plates, or should i go bigger, maybe smaller?
I was hoping to make due without any sight-glasses, but do i need them?

[eminiM]

Oh it will be 8-)
But is 4" enough between the plates, or should i go bigger, maybe smaller?
I was hoping to make due without any sight-glasses, but do i need them?

I'm not a plate stiller but you'd need at least one sight glass on the bottom plate no?
Otherwise you could have a bunch of plates with no reflux on them............

[MadsF]

Do I? As long as i don`t screw up the size on the holes, they should all hold liquid? Or?

i think the need for sight glasses is to confirm when they start and stop refluxing and adjustments to cooling / heat input ?

but NFI relly

[MadsF]

I could just make a few, (top, bottom and some in the middle) and it will probably be enough ;)

What happened to my post BTW?

[R-sole]

Checked the logs, looks like you've been edited for some reason.

[jdonly1]

Wheres all the pics disappeared to mate??
Me brother want to have a look and get some ideas :handgestures-thumbupleft:

[Kimbo]

Hi JD,
we changed servers a while back and lost a few pics during the process :handgestures-thumbupleft:
Good to here from ya anyway mate ;-)

[jdonly1]

Hi JD,
we changed servers a while back and lost a few pics during the process :handgestures-thumbupleft:
Good to here from ya anyway mate ;-)

Im still around,been in hiding lol.
I think mac should pull his finger out and re post pics :teasing-neener:

[Kimbo]

Hi JD,
we changed servers a while back and lost a few pics during the process :handgestures-thumbupleft:
Good to here from ya anyway mate ;-)

Im still around,been in hiding lol.
I think mac should pull his finger out and re post pics :teasing-neener:

And you need to re load that avatar you had :mrgreen:

[jdonly1]

That could be a problem,my old pc died and I lost every thing :angry-banghead: Will have to find a new one :D

[crow]

That could be a problem,my old pc died and I lost every thing :angry-banghead: Will have to find a new one :D

gawd dashit that was my favourite avatar