Aussiedistiller, Home Distilling, Moonshine, Home Brew • View topic

by **RuddyCrazy** » Sun Oct 25, 2020 3:56 pm

a.jpg

by **bluc** » Sun Oct 25, 2020 4:57 pm

Wat ya making?

by **RuddyCrazy** » Sun Oct 25, 2020 5:40 pm

by **Professor Green** » Sun Oct 25, 2020 9:04 pm

by **bluc** » Sun Oct 25, 2020 9:34 pm

by **bluc** » Sun Oct 25, 2020 9:37 pm

:think: :laughing-rolling:

by **The Stig** » Sun Oct 25, 2020 10:02 pm

Toil and trouble :ugeek:

by **RC Al** » Sun Oct 25, 2020 10:03 pm

He's secretly a cross dressing opera singer and these will be the start to the new breastplate for his valkyrie outfit?

Not that theres anything wrong with that

by **Sam.** » Sun Oct 25, 2020 10:09 pm

Extremely tarnished copper domes :think:

by **Wellsy** » Mon Oct 26, 2020 4:53 am

With easter only 5 months away I think it is an Easter egg mould.

by **scythe** » Thu Oct 29, 2020 8:10 pm

Somebody is making an onion head.

by **The Stig** » Thu Oct 29, 2020 9:10 pm

The beginning of a Madonna outfit for Halloween :music-deathmetal:

by **RuddyCrazy** » Fri Oct 30, 2020 1:53 pm

b.jpg

by **RuddyCrazy** » Fri Oct 30, 2020 3:57 pm

c.jpg

by **RuddyCrazy** » Fri Oct 30, 2020 4:40 pm

Still no guesses as what it is :laughing-rolling: :laughing-rolling: well it took 2 house bricks to get immersed in the bucket of citric acid :laughing-rolling: :laughing-rolling: :laughing-rolling:

Tomorrow may hold more of a clue once the outer jacket goes on :laughing-rolling: :laughing-rolling: :laughing-rolling:

by **bluc** » Fri Oct 30, 2020 5:15 pm

Is that 6" diameter? :-B oh 20l bucket
10"diameter? Im with scythe onion or inline thumper :handgestures-thumbupleft:

by **RuddyCrazy** » Fri Oct 30, 2020 5:30 pm

bluc wrote:Is that 6" diameter? :-B on

Started with 2 off 250mm disks cut from a 250 litre Beasley copper hot water tank, now after belling the disks got the diameter down to 210 mm and the centre section is 700mm long with about 20mm overlap. Everything hard soldered with 2% silver solder and tomorrow some 1/2" copper tube with a slit in the tube to fit over the join then once the outer jacket is made it will be all soft soldered, on the first join had one small leak and with second one sealing the unit there is another small leak which I'll find tomorrow when I take it out of the citric acid bath.

Now with everything designed it is always better to start from the bottom up so this creation is the base of the whole project

Now this was supposed to be a wordless thread but it is still out there as to what this project is ( and Stig keep your trap shut mate :laughing-rolling: ) Then we can change the thread name to suit. :laughing-rolling: :laughing-rolling: :laughing-rolling:

Cheers Bryan

by **The Stig** » Fri Oct 30, 2020 6:20 pm

:teasing-neener: :teasing-neener:

by **bluc** » Fri Oct 30, 2020 6:45 pm

Oh so you are building madonna a suit... :D :laughing-rolling:

by **RuddyCrazy** » Fri Oct 30, 2020 7:35 pm

bluc wrote:Oh so you are building madonna a suit... :D :laughing-rolling:

Never thought this forum had a male blonde :laughing-rolling: :laughing-rolling: :laughing-rolling: :laughing-rolling: :laughing-rolling:

.

.

Re: .

Re: .

Re: .

Re: .

Re: .

Re: .

Re: .

Re: .

Re: .

Re: .

Re: .

Re: .

Re: .

Re: .

Re: .

Re: .

Re: .

Re: .

Re: .

Who is online