continuous still...

All general & off topic posts go here
Live Chat Is Here

continuous still...

Postby Redux » Fri Oct 01, 2021 1:51 am

hiya folks, not quite sure where to put this but well worth a watch.... its a glass continuous still...

https://www.youtube.com/watch?v=KcnwqrA ... SrNbTP6QHg

seems like a fairly simple design.
Redux
 
Posts: 879
Joined: Thu Mar 06, 2014 7:08 am
Location: NZ and no longer homeless!
equipment: 5 plate bubbler with 500mm packed section on a 50lt gasser keg ...
set up in a wee shed....

Re: continuous still...

Postby Dancing4dan » Fri Oct 08, 2021 10:28 pm

That’s pretty interesting. Would like to know how his “experimental” siphon at the bottom of the column works.
Dancing4dan
 
Posts: 87
Joined: Fri Mar 12, 2021 12:45 pm
Location: Alberta Canada
equipment: Pot still modular design that can use a beer keg or a 70 L SS pot. Steam distillation in development.

Re: continuous still...

Postby RC Al » Sat Oct 09, 2021 7:45 am

Thereres a link to another vid in the comments

Its 5- 6 tubes rising into a cup, the small side tube exits below the height of those. The smaller tube gets suction via ventui effect from the join on to the bigger line at the other end.
RC Al
Mentor
 
Posts: 1568
Joined: Mon Oct 23, 2017 4:58 pm
Location: Sunshine Coast Area
equipment: 3 plate 4" glasser
2" Potty

Re: continuous still...

Postby Dancing4dan » Sat Oct 09, 2021 10:55 pm

RC Al wrote:Thereres a link to another vid in the comments

Its 5- 6 tubes rising into a cup, the small side tube exits below the height of those. The smaller tube gets suction via ventui effect from the join on to the bigger line at the other end.


Thanks!
Dancing4dan
 
Posts: 87
Joined: Fri Mar 12, 2021 12:45 pm
Location: Alberta Canada
equipment: Pot still modular design that can use a beer keg or a 70 L SS pot. Steam distillation in development.


Return to The Dunder Pit



Who is online

Users browsing this forum: No registered users and 18 guests

x