5 Star Store
Community Guidelines
Newbies Corner
Recipes
AD searchBeen a warm one and had the first sleepin for months after the heat yesterday where I decided to go do arvo shift in my shed where it was nice and cool to work on my radial engine project.
O'well looks like the same today and with only one HB beer left in the fridge and the wee dram is savoured I'm in chat for a few hours.
So lets open the bar...
Meet me in the pub for a chat
Re: Meet me in the pub for a chat
by RuddyCrazy » Sat Dec 05, 2015 6:04 pm
- RuddyCrazy
- Mentor
- Posts: 2449
- Joined: Thu Oct 31, 2013 6:36 pm
- Location: Not far from Kanmantoo SA
- equipment: 4" copper bubbler with a setup for Neutral and a thumper for Whisky and my old 5 litre pot for doing maceration runs and MiniMe the baby pot still
Re: Meet me in the pub for a chat
by rumdidlydum » Sat Dec 05, 2015 6:59 pm
Would love to see your radial project b :O)
- rumdidlydum
- Posts: 2619
- Joined: Sun Oct 27, 2013 7:20 pm
- Location: CQ
- equipment: The infamous Illuminated chicken leg boiler, Rum glass and other bits and bobs
Re: Meet me in the pub for a chat
by woodduck » Fri Dec 11, 2015 7:32 pm
I'm in for a bit if anyone's up for a couple and a chat
- woodduck
- Lifetime Member
- Posts: 3497
- Joined: Mon Jun 16, 2014 5:54 pm
- Location: Good old country SA
- equipment: 4 plate 6" copper bubbler, 6 plate 4" glass bubbler with 500mm packed section three way thumper sitting on a 50 ltr keg boiler with 6000watts, 2" pot still and a 2" boka.
Re: Meet me in the pub for a chat
by rumdidlydum » Wed Dec 23, 2015 9:58 pm
I'm in for a couple :happy-partydance:
- rumdidlydum
- Posts: 2619
- Joined: Sun Oct 27, 2013 7:20 pm
- Location: CQ
- equipment: The infamous Illuminated chicken leg boiler, Rum glass and other bits and bobs
Re: Meet me in the pub for a chat
by WicketNut » Sat Dec 26, 2015 4:25 pm
Sorry About the other night Rummy, my wife came home from her Christmas party, ran past me in the bedroom, straight into the dunny and coughed up most of the afternoons efforts. Apparently my fault ... how does that work? When I come home in the same state, it is my fault then, too ...
- WicketNut
- Posts: 60
- Joined: Tue Jul 01, 2014 11:58 pm
- Location: Eastern Melbourne
- equipment: Copper T500, FSD 4" pot, 25 ltr boiler
100 ltr pro fsd boiler 4 bubble plates, gin baskets
8" inline thumper, not enough space
Re: Meet me in the pub for a chat
by rumdidlydum » Sat Dec 26, 2015 4:57 pm
WicketNut wrote:Sorry About the other night Rummy, my wife came home from her Christmas party, ran past me in the bedroom, straight into the dunny and coughed up most of the afternoons efforts. Apparently my fault ... how does that work? When I come home in the same state, it is my fault then, too ...
All good mate in the same situation it would be my fault too :laughing-rolling:
And anything else that goes wrong. %-(
- rumdidlydum
- Posts: 2619
- Joined: Sun Oct 27, 2013 7:20 pm
- Location: CQ
- equipment: The infamous Illuminated chicken leg boiler, Rum glass and other bits and bobs
Re: Meet me in the pub for a chat
by Rowey » Wed Dec 30, 2015 9:28 pm
Anyone heading to the pub tonight? :handgestures-thumbupleft:
- Rowey
- Posts: 197
- Joined: Mon Dec 29, 2014 4:44 pm
- Location: Central Australia NT
- equipment: Turbo 500, built a pot still, Boka. Currently building a 4 inch bubbler
Re: Meet me in the pub for a chat
by woodduck » Fri Jan 08, 2016 6:42 pm
I'm in for a couple if your keen
- woodduck
- Lifetime Member
- Posts: 3497
- Joined: Mon Jun 16, 2014 5:54 pm
- Location: Good old country SA
- equipment: 4 plate 6" copper bubbler, 6 plate 4" glass bubbler with 500mm packed section three way thumper sitting on a 50 ltr keg boiler with 6000watts, 2" pot still and a 2" boka.
- woodduck
- Lifetime Member
- Posts: 3497
- Joined: Mon Jun 16, 2014 5:54 pm
- Location: Good old country SA
- equipment: 4 plate 6" copper bubbler, 6 plate 4" glass bubbler with 500mm packed section three way thumper sitting on a 50 ltr keg boiler with 6000watts, 2" pot still and a 2" boka.
Re: Meet me in the pub for a chat
by rumdidlydum » Mon Jan 25, 2016 9:54 pm
I'm in :music-deathmetal:
- rumdidlydum
- Posts: 2619
- Joined: Sun Oct 27, 2013 7:20 pm
- Location: CQ
- equipment: The infamous Illuminated chicken leg boiler, Rum glass and other bits and bobs
Re: Meet me in the pub for a chat
by Redux » Mon Jan 25, 2016 10:02 pm
err blonde moment....
wheres the link?
wheres the link?
- Redux
- Posts: 879
- Joined: Thu Mar 06, 2014 7:08 am
- Location: NZ and no longer homeless!
- equipment: 5 plate bubbler with 500mm packed section on a 50lt gasser keg ...
set up in a wee shed....
Re: Meet me in the pub for a chat
by Redux » Mon Jan 25, 2016 10:07 pm
Redux wrote:err blonde moment....
wheres the link?
thicker than the offspring of a village idiot and a tv weather girl....
found it.
- Redux
- Posts: 879
- Joined: Thu Mar 06, 2014 7:08 am
- Location: NZ and no longer homeless!
- equipment: 5 plate bubbler with 500mm packed section on a 50lt gasser keg ...
set up in a wee shed....
Re: Meet me in the pub for a chat
by woodduck » Sat Feb 13, 2016 8:13 pm
Anyone up for a quick drink
- woodduck
- Lifetime Member
- Posts: 3497
- Joined: Mon Jun 16, 2014 5:54 pm
- Location: Good old country SA
- equipment: 4 plate 6" copper bubbler, 6 plate 4" glass bubbler with 500mm packed section three way thumper sitting on a 50 ltr keg boiler with 6000watts, 2" pot still and a 2" boka.
- rumdidlydum
- Posts: 2619
- Joined: Sun Oct 27, 2013 7:20 pm
- Location: CQ
- equipment: The infamous Illuminated chicken leg boiler, Rum glass and other bits and bobs
Re: Meet me in the pub for a chat
by RuddyCrazy » Fri Mar 18, 2016 6:17 pm
OK in the pub for a while before the boag's and my mix kick in, the father in laws estate is finally taking off and my new job of doing new houses doing tiling is taking off. so lets have dram or three.... 8-}
- RuddyCrazy
- Mentor
- Posts: 2449
- Joined: Thu Oct 31, 2013 6:36 pm
- Location: Not far from Kanmantoo SA
- equipment: 4" copper bubbler with a setup for Neutral and a thumper for Whisky and my old 5 litre pot for doing maceration runs and MiniMe the baby pot still
Re: Meet me in the pub for a chat
by Wobblyboot » Fri Mar 18, 2016 6:50 pm
Ahh...a ceramic tiler....
- Wobblyboot
- Posts: 669
- Images: 0
- Joined: Sun Aug 31, 2014 4:41 pm
- Location: Melb
- equipment: 4" glass bubbler
Re: Meet me in the pub for a chat
by Wobblyboot » Fri Mar 18, 2016 6:56 pm
Do u do waterproofing and can u screed a setdown?
- Wobblyboot
- Posts: 669
- Images: 0
- Joined: Sun Aug 31, 2014 4:41 pm
- Location: Melb
- equipment: 4" glass bubbler
- WTDist
- Posts: 2
- Joined: Sun Oct 05, 2014 11:32 am
- Location: Brisbane
- equipment: Building a 4" bubbler with 8" glass thumper
Re: Meet me in the pub for a chat
by Wobblyboot » Fri Mar 18, 2016 7:06 pm
Haha nah, always good to know when I'm on a interstate job tho :-p
- Wobblyboot
- Posts: 669
- Images: 0
- Joined: Sun Aug 31, 2014 4:41 pm
- Location: Melb
- equipment: 4" glass bubbler
- rumdidlydum
- Posts: 2619
- Joined: Sun Oct 27, 2013 7:20 pm
- Location: CQ
- equipment: The infamous Illuminated chicken leg boiler, Rum glass and other bits and bobs
Who is online
Users browsing this forum: No registered users and 17 guests