Ok guys,
I've got an itch than needs to be scatched and with all this carter head talk i can't help myself but give one a go.
I'm gonna try do a couple of things differently but it will be along the lines of doc and macs twin headed Mathusala, hopefully it'll turn out ok.
Here's my thoughts so far, 4" column about 800mm high branching into a "Y", a 4" rc on both branch offs. On the left it will reduce into a 2" pc (i will most likely use the one from the glass duck) for taking fores, heads, tails. On the right, it will go from the 4" to 3" for the carter head intake, then into 4" glass thumper and batanical basket before going into another 2" pc. (See crappy sketch below)
My thoughts are to run it as a pot carter head with low wines but it will be adaptable to the "Duck" if i feel the need. Yes it would probably be easier to go with a standard carter head and use low wine hearts but hey, i love a challenge and its something a bit different i guess.
This build won't be a quick one because of this time of year is quite busy for me but it should be a challenge and very enjoyable.
As usual any input is more than welcomed :handgestures-thumbupleft:
Keen as