The build begins.
Six washing coppers arrived on Saturday morning. 5 copper and one stainless
A bulk deal from a mate on a farm.
I sorted out the best two for the top and bottom halves of a copper kettle and set to straightening them.
![Image](http://i1079.photobucket.com/albums/w514/ModernityOne/IMG_4012.jpg)
Lucking one was quite a heavy gauge and will make an excellent bottom.
They took a hour or so to get to a useable shape.
![Image](http://i1079.photobucket.com/albums/w514/ModernityOne/IMG_4013.jpg)
The next thing on the list was to cut and fit the waste drain. I marked out what I thought it was going to look like(wrong) lucky i waiting before cutting. :angry-banghead:
![Image](http://i1079.photobucket.com/albums/w514/ModernityOne/IMG_4024.jpg)
Next I flanged up the edges to give a good surface area for the solder to hold.
![Image](http://i1079.photobucket.com/albums/w514/ModernityOne/IMG_4026.jpg)
![Image](http://i1079.photobucket.com/albums/w514/ModernityOne/IMG_4028.jpg)
Because there is a flange it is easy to adjust the hole to fit the date pipe.
![Image](http://i1079.photobucket.com/albums/w514/ModernityOne/IMG_4034.jpg)
The pipe got some flanging too. The metal overlap the better.
![Image](http://i1079.photobucket.com/albums/w514/ModernityOne/IMG_4027.jpg)
![Image](http://i1079.photobucket.com/albums/w514/ModernityOne/IMG_4039.jpg)
I need to check that I was going to drain the right way! So a bit of adjustment and the fall should now be out not in!