WTDist wrote:2160p video? are you using a new ultra HD cameras Ive heard about?
hillzabilly wrote:I would have thought that the reflux from the first normal bubble plate would have ta be split into three otherwise two of ya thumpers would run lower ,cheers hillzabilly
woodduck wrote:hillzabilly wrote:I would have thought that the reflux from the first normal bubble plate would have ta be split into three otherwise two of ya thumpers would run lower ,cheers hillzabilly
Sorry mate missed this one.
This is a problem but not too bad. this is one of the twecks that need doing. my temporary fix has been to hang some ss scrubber off the 1st plate above the thumper down commer to direct the flow to the middle to try even them up. I plan to make a new down commer that will split the stream 3 ways and direct it right into each thumper.
I've done a few runs now and are still trying to work out the best way to run this thing. At this stage I'm trying to stay as close as possible to mac's thumper run strategy Which seems to be working quite well. The only thing is i need to "recharge" the thumper part way through cause the thumper doesn't hold quite enough. I have however got my output upto 5ltrs per hour at 92% during the hearts. So my runs are now down to 2hrs for a 50ltr wash :happy-partydance:
wiifm wrote:woodduck wrote:hillzabilly wrote:I would have thought that the reflux from the first normal bubble plate would have ta be split into three otherwise two of ya thumpers would run lower ,cheers hillzabilly
Sorry mate missed this one.
This is a problem but not too bad. this is one of the twecks that need doing. my temporary fix has been to hang some ss scrubber off the 1st plate above the thumper down commer to direct the flow to the middle to try even them up. I plan to make a new down commer that will split the stream 3 ways and direct it right into each thumper.
I've done a few runs now and are still trying to work out the best way to run this thing. At this stage I'm trying to stay as close as possible to mac's thumper run strategy Which seems to be working quite well. The only thing is i need to "recharge" the thumper part way through cause the thumper doesn't hold quite enough. I have however got my output upto 5ltrs per hour at 92% during the hearts. So my runs are now down to 2hrs for a 50ltr wash :happy-partydance:
What about a tube going from a hole in the bottom of each thumper connecting to each other? Liquids height would be identical no matter where the reflux falls.
wiifm wrote:MacStill wrote:... eerrrr you duck has 3 nuts 8-} :))
time to change his user name to threenuts :laughing-rolling:
Users browsing this forum: No registered users and 50 guests