MacStill wrote:No they're a standard silicone tri clamp seal, you can however easily shave the ridges off with a sharp stanley knife to make a flat seal from them.
Cheers,
Mac.
Thanks mac, got a few of these today with my tri clamp :handgestures-thumbupleft:
I shaved them off closely with a sharp kitchen knife and finished them off with some sand paper, not coarse, a high grit sand paper. one side is near perfect and the other is nearly there, just a small bump.
Im wondering how pedantic do i need to be to use them with 2 of my 1/4" ring flanges. should i keep going till both sides are smooth, or will the pressure of the clamp on the seals squeeze it in enough that it doesnt matter?
Might as well ask now as i will do more down the track like this
Cheers