Ok so with my boiler i intend to build a thumper its massive to say the least but im puttin it on a 80l boiler if thats any justifaction (probably still compensating)
Parts list
8 inch pipe 355mm high
8 inch ferrule 45mm high (its more like 8 1/4")
2 x 8" - 4" reducers 110mm high
Total height 620mm
Maybe 1 or 2 sight glasses i was tryn to figure out how to put a glass tube on the side for a height guage i was thinkin of gettin a 3/4 sight glass tube with a longer glass tube and threaded rod
Not sure on risers and downcomer size yet still tryn to nut that out
I have enough 4" to make the cap and 2.5" to make the riser and 1" for the downcomer
I have plenty of 3",2" and 3/4 to if im tryn to ova do it
The question i have is if my still is 4" will going back to 2" restrict flow ensayin that i will only have single 2" caps on my plates
Sorry bout the pic been sideways