rumdidlydum wrote:. The only exception is I'll be running the SCR controller through a power meter to get a bit of feedback what's going on
Just a tip don't wire the monitors after the scr you want it before...
Otherwise the electrical magic disappears and you will be pissed :D
Also definitely put the fan in :handgestures-thumbupleft:
scythe wrote:So the flow of electricity to your elements during a normal run goes;
From the power point through power meter to potentiometer which controls the voltage going into the SSR and finally into the element, yes?
scythe wrote:So the flow of electricity to your elements during a normal run goes;
From the power point through power meter to potentiometer which controls the voltage going into the SSR and finally into the element, yes?
scythe wrote:Follow up question then.
Why does your SSR have a 3-32v DC input (on the sticker ) if you will be giving it 0-240v AC?
Does it matter?
Looking at ebay you can DC-AC, DC-DC and AC-AC SSRs for really cheap which makes me suspicious, it must matter or the chinese don't know what they are trying to sell
control to vapour temp imho
620rossco wrote:control to vapour temp imho
We do realise this is not possible right?
Looking forward to seeing how it comes together. :handgestures-thumbupleft:
Sam. wrote:Yet another great thread from the newbies corner that gets overlooked.
http://www.aussiedistiller.com.au/viewt ... =57&t=3541
Users browsing this forum: No registered users and 12 guests