Darwin award wrote:This is going to be good...it'll look fantastic when you're done, given its size however, would a larger size drain port be a good idea or is 3/4 plenty for the job?
TasSpirits wrote:Darwin award wrote:This is going to be good...it'll look fantastic when you're done, given its size however, would a larger size drain port be a good idea or is 3/4 plenty for the job?
Should be plenty, I have a hose that runs through the back wall of my shed, end of a run I just open the valve and let it drain out. Once its shortened I will be looking at about 140L, so will be doing 100L runs, 2 strip runs then a spirit run through the bubbler :handgestures-thumbupleft:
Shiftynev wrote:Tas, that looks fantastic, can't wait to see it finished and polished. It'll be a one of a kind. Good luck with the rest of the build.
Cheers
maddogpearse wrote:This boiler is the tits! Are you going to give her a real nice polish up Tas?
WTDist wrote:damn need to find myself a copper boiler now. looks like it was reasonably easy for you to convert it to a boiler with soft solder
Users browsing this forum: No registered users and 20 guests