G'day Guy's,
Well finally had some time to get this project done but as usual Murphy said allo :angry-banghead: One 4" tri clamp short as the keg triclamp went on the thumper. Tomorrow I'll go in and see how fleece want for one and get some vinegar and have a look how cheap the goon cartons are as that 30 litres of TPW is itching for the first run.
Anyway the thumper, 1-1/4" thick wall copper pipe and the bubble cap a 2-1" new reducer, filled it up after finishing it and a tad over 2.5 litres.
thumper.jpg
A pic of the still assembled and ready to go but I reckon I will make a new 3-4" reducer 75mm high to bring down the overall height. Besides making these reducers are fun and don't long to make.
bubbler.jpg
As I am using gas I will install some blueboard around for a fire sheild, still go to hook up the 12 volt flowjet pump as I reckon it may even suck the boiler fluid out after priming the pump.
Anyway it has been good fun building this and more mod's to come in the future.
Cheers Bryan
You do not have the required permissions to view the files attached to this post.