IMG_0610.jpg
Got myself a 9l water fire extinguisher that i thought would make a good thumper. I had to cut off the the original socket, as it was unknown thread and size. I hard soldered on a stainless 1" socket.
IMG_0612.jpg
IMG_0607.jpg
Got a piece of 3/4 copper going through the guts of a 3/4, 3/4, 1" tee, with some holes drilled into the bottom to let the vapour out at the bottom of the thumper.
IMG_0609.jpg
IMG_0613.jpg
You do not have the required permissions to view the files attached to this post.