maddogpearse wrote:well, it really only has to handle 2000w, not 2400. So assuming it can do that, then bugger the power controller. I'll run it as per mac's running a bubbler the easy way.
viewtopic.php?f=36&t=2681
So, once your column is up to temp and in full reflux just slowly close your reflux valve until you get a drip or two every second, this is how I get rid of my fore shots while leaving the column in 99.9% reflux mode for around 15 to 20 minutes.
WTDist wrote:maddogpearse wrote:well, it really only has to handle 2000w, not 2400. So assuming it can do that, then bugger the power controller. I'll run it as per mac's running a bubbler the easy way.
viewtopic.php?f=36&t=2681
arnt you making a keg in above pics with a couple of elements ;-)
WTDist wrote:mine with water flow on full with 5 1/2" tubes cant do this. it still comes out at a decent speed. not sure how the 3" will go but for me to do a small drip i will need to do 3/4 power then power up.
WTDist wrote:
I was wondering about this build a few days ago, nice to see its still moving along :handgestures-thumbupleft:
Return to Plated Column Stills
Users browsing this forum: No registered users and 86 guests