waiting isnt an issue. getting a good probe is. can get them for $1 from hong kong and no shipping but how do i know it if is accurate.
Im thinking now I should cut my sensor cable and just using male and female crimps to rejoin the wires, and/or the heat shrink plastic as my sensor is fine, just a little bit of wire exposed. assuming i can shrink it with my map holding it a substantial distance away underneath :shifty:
The length isnt long already and if i cut out 3cm then there goes a bit more. Im wondering if i can just use some 1.5mm cable and lengthen the cable myself or should it really be a thin cable like the sensor. looks ultra thin.
does thicker cable give off different reading or is it just thin because of the such small voltage in it and they use small cable to cut costs, meaning i can touch it while on and nothing happens.
If adding some length myself is 1.5mm cable ok?
Or, should i get something smaller from jaycar like maybe this...
http://www.jaycar.com.au/fig-8-white-ac ... e/p/WB1560aside from ebay i rang around and a shop near me has them. about $30, yea right could buy 2 new STC's for that
Cheers
WT