Zak Griffin wrote:Watching with interest.
Are you going an offset carter head, or just an inline basket?
hillzabilly wrote:He's at it again ,will add another dimension to your ability for sure ,was just curiouse to know how you expanded the pipe ta fit the ferrules ,can be a stumbleling point for some.cheers hillzabilly ;-)
hillzabilly wrote:They are exhaust pipe expanders,you got the knack with metal ,I bought a set and really struggled ta get a good even job and ended up stripping the thread on the size I really needed ,by useing the rattle gun :angry-banghead: .cheers hillzabilly
hillzabilly wrote:Most run the thumper underneath plates,do ya know how much liquid it holds ?
WTDist wrote:how long is the downcomer cap?
looking at the pic does it have a downcomer or is it a DC and then a tap to drain??
:handgestures-thumbupleft:Magnus wrote:hillzabilly wrote:They are exhaust pipe expanders,you got the knack with metal ,I bought a set and really struggled ta get a good even job and ended up stripping the thread on the size I really needed ,by useing the rattle gun :angry-banghead: .cheers hillzabilly
I find it best annealing the copper first then expand
Users browsing this forum: No registered users and 10 guests