JamieC wrote:hillzabilly wrote:Have a look at viewtopic.php?f=14&t=10046 ,if ya have 2 kegs and a welder this could be another option ,I sure as hell wouldnt mind haveing a rig like that.cheers hillzabilly :D
That's a hell of a setup. I do have a third keg that is my current boiler.
Would you run wash or back set in the thumper. Combo of both?
hillzabilly wrote:I would flip ya kegs ,use the 2inch openings for drains and mount 4inch ferruls on what was the bottom end ,ifn ya do that then your element will have ta be moved any way or could be converted to a thermo port .the older 18gal kegs useually come with a larger opening wich is easy to weld a 4inch ferrule directly to without haveing ta cut up anything.I have never heard of anyone useing an element in the thumper and my guts tell me it could be risky so I would not advise it unless good research shows otherwise,anyhoo cheers hillzabilly
Users browsing this forum: No registered users and 57 guests