and i stole the idea of the boiler from wooduck its the best design i have ever seen and its rock solid sturdy as an upgrade to the shed is next then the ideas for a closed water circuit as water pressure is no the best here if someone in the house uses the tap at the same time it affects the pressure its truly a learning of the meaning patience
equipment: 4 plate 6" copper bubbler, 6 plate 4" glass bubbler with 500mm packed section three way thumper sitting on a 50 ltr keg boiler with 6000watts, 2" pot still and a 2" boka.
i'm thinking it should do the trick i do prefer the old school over the modular wasn't really keen on all the extra clamps :violin: i know it sounds like whinging but to me it makes sense copper 1 piece the old kiss method
Yeah very nice the man can weld I bet he wants a few drams for that. Now after that up grade you will be upgrading a few other thing to keep it hot. You will be up for some blind tastings soon. No stopping you now. Just a bit of spit n polish(on the still) :)) and it will look even better. Nice work
equipment: 4", 4 plate "Frankenfurter" copper bubbler and blockhead on a 50L 3000W electric boiler, 10000W controller - don't even know why I need that much, all grain HERMS system through 18G HLT keg and 50L mash tun.
equipment: 2" pot with 2" shotty 400mm long 5x 1/2" on a t500 boiler. 50l keg boiler 4" still mount 4" sight glass 1" drain.. 4 plate 4" bubbler, 600mm packed section