This area is for recipes that are not yet proven, use this area for experiments, recipe research and development of your own variations. Once a recipe is accepted as being good by the consensus it will be moved to the proven section.
by Woodsy71 » Sun Apr 16, 2017 3:13 pm
Mate, sometimes a wash can be done but Co2 is still coming through the airlock. Stick a finger in the wash. Taste it. If it's not sweet, run it. :handgestures-thumbupleft:
-
Woodsy71
-
- Posts: 598
- Joined: Tue Apr 23, 2013 8:42 am
- Location: Qld
- equipment: CM and a Pot
by benmick6 » Sun Apr 16, 2017 6:50 pm
Thanks mate. Just tasted it. Still a bit sweet. Will leave it another couple of weeks and see how it goes. It has a good flavour to it. We have had some cool nights here that might of slowed it down a bit. I've got the heater strap around it and have insulated it now so it's about 28 degrees.
Ben
-
benmick6
-
- Posts: 51
- Joined: Sun May 11, 2014 6:17 am
- Location: spreyton, tasmania
- equipment: 2 inch boka, 2 inch pot still, 50l keg boiler with 2.4 and 3.6kw elements
by orcy » Wed Aug 30, 2017 4:51 pm
Has anyone tried this with other citrus? Tangellos are 60c a kg atm at my local. Wondering if it would be a worthy substitute.
-
orcy
-
- Posts: 359
- Joined: Wed Jul 05, 2017 1:02 pm
- Location: Seaford, VIC
- equipment: Old style T500 style still. honestly, I dont even remember who made it anymore
4 inch soon to be modular pot.
by Plumby » Wed Aug 30, 2017 5:21 pm
Nothing ventured, nothing gained man. Let us know how you go. :handgestures-thumbupleft:
-
Plumby
-
- Posts: 1175
- Joined: Sat Aug 02, 2014 7:19 am
- Location: South East Queensland
- equipment: 50 litre keg boiler with a 2200watt element and a 2 inch pot still called Shaniqua with a 32mm over 19mm 800mm long liebig condenser attached.
by orcy » Wed Aug 30, 2017 6:10 pm
Problem is i dont have a bubbler yet. So i need to make quite a bit to make it worthwhile on the pot. Maybe ill try anyway.
-
orcy
-
- Posts: 359
- Joined: Wed Jul 05, 2017 1:02 pm
- Location: Seaford, VIC
- equipment: Old style T500 style still. honestly, I dont even remember who made it anymore
4 inch soon to be modular pot.
by Plumby » Wed Aug 30, 2017 6:31 pm
I used my pot still for my my lemon vodka. I hollowed out 3 batches of lemons and froze them. Every time I did a strip run I added the lemon pulp to the yeast bed from the previous run, I did not add backset just reused the trub from the previous wash. When I had low wines from 3 washes I watered down to 30% then did a spirit run. Took nearly 2 litres of nice hearts, the rest went to the feints keg for a neutral run.
-
Plumby
-
- Posts: 1175
- Joined: Sat Aug 02, 2014 7:19 am
- Location: South East Queensland
- equipment: 50 litre keg boiler with a 2200watt element and a 2 inch pot still called Shaniqua with a 32mm over 19mm 800mm long liebig condenser attached.
by db1979 » Wed Aug 30, 2017 7:50 pm
How did it taste plumby? I tried this a while ago and ran it through my 2" bubbler with 4 plates but it had very little flavour. It was lovely straight at 40% but with soda water had almost no flavour. Is this how it's supposed to be?
-
db1979
-
- Posts: 1760
- Joined: Sat Dec 29, 2012 3:47 pm
- Location: South of the big smoke in banana bender land.
- equipment: Eve - 4" x 4 plate solid state bubbler (sieve plates), 330 mm packed section on a keg boiler with 2 x 2000 W elements.
Currently having a makeover: 2" x 4 plate solid state bubbler (1" bubble caps, no sight glasses...maybe not for much longer!) on a bain-marie boiler.
by Lowie » Wed Aug 30, 2017 9:08 pm
I've got one of these down atm. The last one I ran through my bubbler stripped the flavour. I'm thinking of running this next lot in pot stil mode to retain the flavour. I'd be interested to hear what others do/think. cheers.
-
Lowie
-
- Posts: 712
- Joined: Sun May 24, 2015 1:32 pm
- Location: Crow eater
- equipment: 4", 4 plate "Frankenfurter" copper bubbler and blockhead on a 50L 3000W electric boiler, 10000W controller - don't even know why I need that much, all grain HERMS system through 18G HLT keg and 50L mash tun.
by Plumby » Wed Aug 30, 2017 9:40 pm
Taste was strong on its own but I tried a few mixers with it. Best I found was, as much ice as you can fit in a glass, a good slug of lemon vodka and top up with ginger beer. Mmm delicious.
-
Plumby
-
- Posts: 1175
- Joined: Sat Aug 02, 2014 7:19 am
- Location: South East Queensland
- equipment: 50 litre keg boiler with a 2200watt element and a 2 inch pot still called Shaniqua with a 32mm over 19mm 800mm long liebig condenser attached.
by Nino » Thu Aug 31, 2017 6:31 pm
Plumby wrote:Taste was strong on its own but I tried a few mixers with it. Best I found was, as much ice as you can fit in a glass, a good slug of lemon vodka and top up with ginger beer. Mmm delicious.
Sounds good Plumby, I will have to try it when the lemon tree has lemons on it. I will get double bang for my buck pulp to make lemon vodka and jest to make more lemoncello :).
Regards,
Nino
-
Nino
-
- Posts: 354
- Joined: Sat Jun 13, 2015 10:33 am
- Location: Adelaide S. Aust
- equipment: Black Mangus reflux still and 30lt boiler. 4" Modular pot still from FSD. Now a 50lt keg boiler with 2 2400 watt heating elements and a controller. 5 plate bubbler with a 500mm packed section
by Plumby » Thu Aug 31, 2017 7:19 pm
I was lucky enough to have 3 lemon trees to raid so that made it good for me. I used lemon zest for Limoncello a few times but I just can't get the taste balance right.
-
Plumby
-
- Posts: 1175
- Joined: Sat Aug 02, 2014 7:19 am
- Location: South East Queensland
- equipment: 50 litre keg boiler with a 2200watt element and a 2 inch pot still called Shaniqua with a 32mm over 19mm 800mm long liebig condenser attached.
by db1979 » Mon Oct 02, 2017 6:06 pm
I just put down 20 L. I forgot about the lemon skins as I had zested all my lemons for later to make Limoncello. I'd put them in zip lock bags in the freezer in quantities enough to make 5 lots of 1 L batches so instead I just tipped one bag of zest into the fermenter. It's around about the zest of 8 lemons. I'll see how it goes. Also I couldn't get ec1118 but the bloke at the local hbs sold me a champagne yeast (can't remember what it was and the packet is in the bin now, it has a s, a 9 and an n in its name). I'm going to run it once through my 4" bubbler (4 plates since it's all or none). Looking forward to having some yummy lemon vodka straight on ice :happy-partydance:
-
db1979
-
- Posts: 1760
- Joined: Sat Dec 29, 2012 3:47 pm
- Location: South of the big smoke in banana bender land.
- equipment: Eve - 4" x 4 plate solid state bubbler (sieve plates), 330 mm packed section on a keg boiler with 2 x 2000 W elements.
Currently having a makeover: 2" x 4 plate solid state bubbler (1" bubble caps, no sight glasses...maybe not for much longer!) on a bain-marie boiler.
by Wobblyboot » Mon Oct 02, 2017 6:23 pm
db1979 wrote:I just put down 20 L. I forgot about the lemon skins as I had zested all my lemons for later to make Limoncello. I'd put them in zip lock bags in the freezer in quantities enough to make 5 lots of 1 L batches so instead I just tipped one bag of zest into the fermenter. It's around about the zest of 8 lemons. I'll see how it goes. Also I couldn't get ec1118 but the bloke at the local hbs sold me a champagne yeast (can't remember what it was and the packet is in the bin now, it has a s, a 9 and an n in its name). I'm going to run it once through my 4" bubbler (4 plates since it's all or none). Looking forward to having some yummy lemon vodka straight on ice :happy-partydance:
Sounds like this
https://vintnersharvest.com/collections ... ucts/45588A wine yeast....should be ok :handgestures-thumbupleft:
There is a lot of flavor in those skins, u need them in there.
-
Wobblyboot
-
- Posts: 669
- Images: 0
- Joined: Sun Aug 31, 2014 4:41 pm
- Location: Melb
- equipment: 4" glass bubbler
by db1979 » Mon Oct 02, 2017 7:16 pm
Do you think the zest will do?
-
db1979
-
- Posts: 1760
- Joined: Sat Dec 29, 2012 3:47 pm
- Location: South of the big smoke in banana bender land.
- equipment: Eve - 4" x 4 plate solid state bubbler (sieve plates), 330 mm packed section on a keg boiler with 2 x 2000 W elements.
Currently having a makeover: 2" x 4 plate solid state bubbler (1" bubble caps, no sight glasses...maybe not for much longer!) on a bain-marie boiler.
by Wobblyboot » Mon Oct 02, 2017 8:11 pm
I’m big on the majority of the flavors are in the skins. The pulp gives the sugars.
-
Wobblyboot
-
- Posts: 669
- Images: 0
- Joined: Sun Aug 31, 2014 4:41 pm
- Location: Melb
- equipment: 4" glass bubbler
by vossy » Sat Oct 14, 2017 7:13 am
Hello Legends,
Can someone assist I cant get hold of and DAP at the moment and have a heap of lemons, what else could I use to get this started.
-
vossy
-
- Posts: 82
- Joined: Fri Aug 26, 2016 7:10 pm
- Location: Albany, WA
- equipment: 2 x Essencia Super Reflux 25L
1 x 50L Keg Pot Still/Bubbler with Gin Caddy
by bayshine » Sat Oct 14, 2017 7:20 am
You could use a wine or beer yeast nutrient from a HBS , it will be a similar thing :handgestures-thumbupleft:
-
bayshine
-
- Posts: 873
- Images: 0
- Joined: Sat Mar 16, 2013 11:30 pm
- Location: Turquoise coast dubbya aye
- equipment: FSD 6 inch 5 plater block head On a FSD 100lt pro boiler
3” copper reducer bokka on a keg boiler
by vossy » Sat Oct 14, 2017 7:32 am
Ill try and get down their before they close today but our "HBS" doesn't keep much stuff any other alternatives?
-
vossy
-
- Posts: 82
- Joined: Fri Aug 26, 2016 7:10 pm
- Location: Albany, WA
- equipment: 2 x Essencia Super Reflux 25L
1 x 50L Keg Pot Still/Bubbler with Gin Caddy
by bluc » Sat Oct 14, 2017 8:42 am
Tomato paste is a good nutrient not sure if it would affect flavour though..
-
bluc
- Site Donor
-
- Posts: 8978
- Joined: Tue Apr 14, 2015 5:47 pm
- Location: sunshine coast
- equipment: 2" pot with 2" shotty 400mm long 5x 1/2" on a t500 boiler.
50l keg boiler 4" still mount 4" sight glass 1" drain..
4 plate 4" bubbler, 600mm packed section
by woodduck » Sat Oct 14, 2017 9:49 am
Hardware or rural supply joint should have DAP. It’s a fertilizer.
-
woodduck
- Lifetime Member
-
- Posts: 3497
- Joined: Mon Jun 16, 2014 5:54 pm
- Location: Good old country SA
- equipment: 4 plate 6" copper bubbler, 6 plate 4" glass bubbler with 500mm packed section three way thumper sitting on a 50 ltr keg boiler with 6000watts, 2" pot still and a 2" boka.
Return to Recipe Development
Who is online
Users browsing this forum: harold01, howard, Puk and 43 guests