Azza76 wrote:Here is how I run my 2" pot with shotty vertical is the go :handgestures-thumbupleft:
All I need is some 4" tees and I got a bubbler spewin I missed the ones for sale recently :handgestures-thumbdown:
Was going to make a Liebig but I had the gear to make a shotty.
Stripping some ujsm.
azzman wrote:Azza76 wrote:Here is how I run my 2" pot with shotty vertical is the go :handgestures-thumbupleft:
All I need is some 4" tees and I got a bubbler spewin I missed the ones for sale recently :handgestures-thumbdown:
Was going to make a Liebig but I had the gear to make a shotty.
Stripping some ujsm.
a triclamp and an easy flange or ferrules in the lyn arm will allow the collection height to be raised or lowered to whatever you want.
Swedish Pride wrote:azzman wrote:Azza76 wrote:Here is how I run my 2" pot with shotty vertical is the go :handgestures-thumbupleft:
All I need is some 4" tees and I got a bubbler spewin I missed the ones for sale recently :handgestures-thumbdown:
Was going to make a Liebig but I had the gear to make a shotty.
Stripping some ujsm.
a triclamp and an easy flange or ferrules in the lyn arm will allow the collection height to be raised or lowered to whatever you want.
yep, this is what I got, can't recomend it enough
Azza76 wrote:Swedish Pride wrote:azzman wrote:Azza76 wrote:Here is how I run my 2" pot with shotty vertical is the go :handgestures-thumbupleft:
All I need is some 4" tees and I got a bubbler spewin I missed the ones for sale recently :handgestures-thumbdown:
Was going to make a Liebig but I had the gear to make a shotty.
Stripping some ujsm.
a triclamp and an easy flange or ferrules in the lyn arm will allow the collection height to be raised or lowered to whatever you want.
yep, this is what I got, can't recomend it enough
I did not know that azza, hope mine is going to be ok mounted on a 45 degree angle :think:
Was going to go with that setup but the way I run the parrot clamped on to the condenser will only work vertically plus I'm pretty sure shotgun condensers work the best vertical :handgestures-thumbupleft:
bluc wrote:You get more pooling/smearing from a parrot then the corner of a shotgun.
Plumby pooling is caused by the reducer on the end of the shotty not the pipes inside...
Doubleuj wrote:Brass can be pickled with peroxide solution but it needs to be done regularly to avoid the possibility of lead leaching into your product. :handgestures-thumbdown:
Best to avoid it and go stainless
mark84 wrote:Can't upload a photo says it's too big
Users browsing this forum: No registered users and 53 guests