hillzabilly wrote:By all means try and reinvent the wheel,but I would suggest ya go with a known quantity befor ya spend a lot of time and money on development of something that may not work all that well,not something most tight asses would consider,if the objective is to reduce dead spots ,I see a big one in the center area ,and on watching either my 2inch caps or 1inch ones I do not see dead areas at all ,I respect your idear and would be very interested ta see ifn how it would work.cheers hillzabilly ;-)
bluc wrote:Whole ring would be the riser but rather than a hole half way up consider notchs all round the bottom. Be fiddly little things to make but i reakon they would work. :handgestures-thumbupleft:
On second thought dont reakon they would even be that fiddly.
warramungas wrote:That top picture is speccy but it wouldn't need a downcomer pipe in the middle. Just a hole as anything that makes it over the top can go downwards. Its like one of those caps with the downcomer in the middle just on a larger scale.
I built something similar for my 2" column.
Users browsing this forum: No registered users and 21 guests