Hawkeye wrote:Got a problem with my Macboka....
It's leaking at the lid attachment. Have pulled apart, cleaned seals, wrapped thread with plumbers tape, also tried a flour paste but it won't seal.
Any suggestions???
hillzabilly wrote:Hawkeye wrote:Got a problem with my Macboka....
It's leaking at the lid attachment. Have pulled apart, cleaned seals, wrapped thread with plumbers tape, also tried a flour paste but it won't seal.
Any suggestions???
G -day ,I was just wondering how much power ya throwing at it ,with elements 2000wt or over I found it a lot more likely that the flooding issues were more possible especialy with low ABV wash ,when I ran a 2inch reflux and 30lt boiler,1500-1850wt seemed ta be the sweet spot.I fitted an extra element,used the original 2000wt ta heat up and then swapped the plug to the smaller one for the run.Some build power controlers wich can allow you ta dial into the sweet spot for ya still.anyhooo cheers hillzabilly :handgestures-thumbupleft:
Zak Griffin wrote:You can make quite a drinkable whiskey out of breakfast cereal mate. Have a crack at the CFW or nutrigrain recipes :handgestures-thumbupleft:
Plumby wrote:Zak Griffin wrote:You can make quite a drinkable whiskey out of breakfast cereal mate. Have a crack at the CFW or nutrigrain recipes :handgestures-thumbupleft:
:text-+1:
Zak Griffin wrote:You can make quite a drinkable whiskey out of breakfast cereal mate. Have a crack at the CFW or nutrigrain recipes :handgestures-thumbupleft:
Bundaboy wrote:Does anyone have any thoughts (i.e. worth a try/don't waste your time) on lightly packing a MacBoka (or any reflux still) to make it run as a pseudo pot still?
Sam. wrote:Yep many have run a reflux still as a pot and tried to run a pot as a reflux and yeah you can half achieve each but it won't be the same, get my drift? ;-)
Users browsing this forum: No registered users and 22 guests