by scythe » Fri Apr 20, 2018 4:26 am
Step 1: buy t500 to triclamp adaptor.
Step 2: buy 1m of 2" copper, 2x 2" F-F capillary joiner and 2x 2" 90° capillary F-F elbows.
Step 3: buy 7x 2" triclamp ferrules, 4x epdm or silicone seals and 4x 2" clamps.
Step 4: cut 1m length in half.
Step 5: solder 1 ferrule into each end of each elbow.
Step 6: solder 1 ferrule into 1 end of each 2"joiner.
Step 7: solder other end of each joiner to one bit of the 2" copper.
Congratulations you have just made a 2" pot still.
Now you need to cool the vapour down, either use the other length of 2" copper, ferrule/joiner (will need to buy another ferrule and joiner at step 2) to make a shotgun PC, or make a 3/4" over 1/2" leibig condenser.
Or buy a 2" PC from 5 star distilling...
Or if you have no soldering available buy the bits to make a "pelican" pot still.
1x300mm sanitary spool, 1x sanitary 45° bend, 1x sanitary 180° bend, 1x 2" PC from 5star.
Or whatever.