Gumtree deals

All general & off topic posts go here
Live Chat Is Here

Re: Gumtree deals

Postby Redux » Thu Oct 12, 2017 7:38 pm

EziTasting wrote:Waiting for Mork & Mindy to open the hatch and pop out ... “Nanoo-Nanoo!”



mmmmm mindy.....

:romance-kisscheek:
Redux
 
Posts: 879
Joined: Thu Mar 06, 2014 7:08 am
Location: NZ and no longer homeless!
equipment: 5 plate bubbler with 500mm packed section on a 50lt gasser keg ...
set up in a wee shed....

Re: Gumtree deals

Postby EziTasting » Thu Oct 12, 2017 7:51 pm

Redux wrote:
EziTasting wrote:Waiting for Mork & Mindy to open the hatch and pop out ... “Nanoo-Nanoo!”



mmmmm mindy.....

:romance-kisscheek:



:laughing-rolling: dirty old man!
EziTasting
 
Posts: 2084
Joined: Fri Sep 25, 2015 5:15 pm
Location: FNWA
equipment: Newbie - Keg Boiler & 4" 4 plate glasser

Re: Gumtree deals

Postby Redux » Thu Oct 12, 2017 8:10 pm

EziTasting wrote:
Redux wrote:
EziTasting wrote:Waiting for Mork & Mindy to open the hatch and pop out ... “Nanoo-Nanoo!”



mmmmm mindy.....

:romance-kisscheek:



:laughing-rolling: dirty old man!


:handgestures-thumbupleft:
Redux
 
Posts: 879
Joined: Thu Mar 06, 2014 7:08 am
Location: NZ and no longer homeless!
equipment: 5 plate bubbler with 500mm packed section on a 50lt gasser keg ...
set up in a wee shed....

Re: Gumtree deals

Postby Zak Griffin » Thu Oct 19, 2017 5:37 pm

15083985332081498697329.jpg


Picked this copper range hood up for $20... There's about $60 worth of scrap copper there if I can't get $100 for it after a quick scrub!
You do not have the required permissions to view the files attached to this post.
Zak Griffin
Lifetime Member
 
Posts: 6832
Joined: Mon Jul 15, 2013 9:34 pm
Location: Radelaide
equipment: "The Heart of Gold" - 4" Bubbler - finally bubbling!
"Zaphod" - 3" Pot - retired
"Agrajag" - 6" Bubbler - midlife crisis build?

Re: Gumtree deals

Postby EziTasting » Thu Oct 19, 2017 5:55 pm

Looks like it should be sitting on top of a boiler, underneath a still!!!
EziTasting
 
Posts: 2084
Joined: Fri Sep 25, 2015 5:15 pm
Location: FNWA
equipment: Newbie - Keg Boiler & 4" 4 plate glasser

Re: Gumtree deals

Postby Stonemaker1 » Thu Oct 19, 2017 6:33 pm

EziTasting wrote:Looks like it should be sitting on top of a boiler, underneath a still!!!


:text-+1: :text-lol:
Stonemaker1
 
Posts: 93
Joined: Thu Sep 14, 2017 2:01 pm
equipment: 50 litre pot still

Re: Gumtree deals

Postby woodduck » Thu Oct 19, 2017 7:41 pm

That's gonna be one big rc under that reducer :laughing-rolling:
woodduck
Lifetime Member
 
Posts: 3497
Joined: Mon Jun 16, 2014 5:54 pm
Location: Good old country SA
equipment: 4 plate 6" copper bubbler, 6 plate 4" glass bubbler with 500mm packed section three way thumper sitting on a 50 ltr keg boiler with 6000watts, 2" pot still and a 2" boka.

Re: Gumtree deals

Postby Stonemaker1 » Thu Oct 19, 2017 9:04 pm

woodduck wrote:That's gonna be one big rc under that reducer :laughing-rolling:


:laughing-rolling: :laughing-rolling: that's fark'n Gold....'
Stonemaker1
 
Posts: 93
Joined: Thu Sep 14, 2017 2:01 pm
equipment: 50 litre pot still

Re: Gumtree deals

Postby Zak Griffin » Sat Nov 04, 2017 7:10 pm

This popped up on my FB. Good reservoir, a bit more inconspicuous than an IBC! Give me a yell if you want me to ask about it.

Screenshot_20171104-193757.png


In Adelaide, obviously.
You do not have the required permissions to view the files attached to this post.
Zak Griffin
Lifetime Member
 
Posts: 6832
Joined: Mon Jul 15, 2013 9:34 pm
Location: Radelaide
equipment: "The Heart of Gold" - 4" Bubbler - finally bubbling!
"Zaphod" - 3" Pot - retired
"Agrajag" - 6" Bubbler - midlife crisis build?

Re: Gumtree deals

Postby Apple-O-Me-Eye » Tue Jan 30, 2018 9:38 pm

Just found this on gumtree. What does everyone think? http://www.gumtree.com.au/s-ad/applecro ... ios_social
Apple-O-Me-Eye
 
Posts: 165
Joined: Sun Feb 19, 2012 8:25 am
Location: Brisbane
equipment: I run a pot still with liebeg condenser, 90deg line arm on a gas poweredkeg boiler

Re: Gumtree deals

Postby Professor Green » Wed Jan 31, 2018 5:45 am

A somewhat novel design. Not sure about the "tuba" section at the top. Could act as very small thumper I suppose.

Cheers,
Prof. Green.
Professor Green
 
Posts: 2483
Joined: Fri Apr 17, 2015 1:10 pm
Location: Victoria
equipment: FSD 100 litre milk can with 2 x 2400W elements
FSD Neutraliser
FSD Carter Head
12 litre double boiler with 2400W element

Re: Gumtree deals

Postby db1979 » Wed Jan 31, 2018 7:08 am

If the wider section above the sight glass is a condenser then it should be an ok reflux still but won't hit azeo (I'm guessing at this though). I can't see any water tubes though.

Otherwise if it's not a condenser then this is simply a pot still that will have more passive reflux than most others (which makes almost no difference overall) and it has packing (pretty useless if it's a pot still) and a sight glass (pretty useless on a pot still).

Also, looks like brass fittings either side of the liebig condenser, but these could be replaced easily.

Like professor said, not sure what that loop of copper before the liebig is supposed to do. I don't think it will help in any way. Maybe passive reflux will cause it to develop a bath at the bottom of the trap/bend and the vapour will be forced through that bath until the bath heats up again and boils away. I would imagine this would happen between fores and heads, heads and hearts and then again between hearts and tails. I think it would increase smearing.

Not worth $700 in my opinion.
db1979
 
Posts: 1760
Joined: Sat Dec 29, 2012 3:47 pm
Location: South of the big smoke in banana bender land.
equipment: Eve - 4" x 4 plate solid state bubbler (sieve plates), 330 mm packed section on a keg boiler with 2 x 2000 W elements.
Currently having a makeover: 2" x 4 plate solid state bubbler (1" bubble caps, no sight glasses...maybe not for much longer!) on a bain-marie boiler.

Re: Gumtree deals

Postby db1979 » Wed Jan 31, 2018 7:10 am

Also, that parrot will surge big time :o
db1979
 
Posts: 1760
Joined: Sat Dec 29, 2012 3:47 pm
Location: South of the big smoke in banana bender land.
equipment: Eve - 4" x 4 plate solid state bubbler (sieve plates), 330 mm packed section on a keg boiler with 2 x 2000 W elements.
Currently having a makeover: 2" x 4 plate solid state bubbler (1" bubble caps, no sight glasses...maybe not for much longer!) on a bain-marie boiler.

Re: Gumtree deals

Postby Apple-O-Me-Eye » Wed Jan 31, 2018 7:01 pm

Yeah, this bad boy really made no sense to me.

I miss my rig :(
Apple-O-Me-Eye
 
Posts: 165
Joined: Sun Feb 19, 2012 8:25 am
Location: Brisbane
equipment: I run a pot still with liebeg condenser, 90deg line arm on a gas poweredkeg boiler

Re: Gumtree deals

Postby Sam. » Wed Jan 31, 2018 7:31 pm

I didn't get the output before the PC that bent over itself, that would hold some liquid in that smearing the shit out of everything :wtf:
Sam.
Lifetime Member
 
Posts: 10405
Joined: Sun Jul 17, 2011 7:19 pm
Location: South Oz Straya
equipment: Original FSD 5 plate 4 inch modular bubbler SSG with hand crafted plates and parrot by Mac.
18 Gal boiler.
2 x 2400W elements and power controller.
.

Re: Gumtree deals

Postby woodduck » Wed Jan 31, 2018 7:46 pm

But Sam it's got the "glass bit for botanicals" and "it’s made by professional still builders in the USA, it's the best you'll buy!" Nice pitch mate but not quite good enough to make me wanna buy it :laughing-rolling: :laughing-rolling: :laughing-rolling:
woodduck
Lifetime Member
 
Posts: 3497
Joined: Mon Jun 16, 2014 5:54 pm
Location: Good old country SA
equipment: 4 plate 6" copper bubbler, 6 plate 4" glass bubbler with 500mm packed section three way thumper sitting on a 50 ltr keg boiler with 6000watts, 2" pot still and a 2" boka.

Re: Gumtree deals

Postby mattyb » Thu Feb 01, 2018 1:07 pm

https://www.gumtree.com.au/s-ad/rossmoy ... 1173725725

I wonder if it seals? Wish I was closer to perth looks like a great boiler potential?
mattyb
 
Posts: 159
Joined: Wed Aug 10, 2016 8:10 pm
Location: WA
equipment: 4" Glasser

Re: Gumtree deals

Postby Ripas » Thu Feb 01, 2018 1:20 pm

Ripas
 
Posts: 70
Joined: Tue Oct 18, 2016 8:20 am
Location: Sunshine Coast
equipment: 2"boka with 1m stainless section - 50L keg with 2000w element

Re: Gumtree deals

Postby RC Al » Thu Feb 08, 2018 7:51 pm

lots of Grain brewing gear and electronics stuff - prices not great? will bring small stuff to perth - some of it may be worthwhile to someone on here
https://www.gumtree.com.au/s-ad/tambori ... 1172560866
RC Al
Mentor
 
Posts: 1568
Joined: Mon Oct 23, 2017 4:58 pm
Location: Sunshine Coast Area
equipment: 3 plate 4" glasser
2" Potty

Re: Gumtree deals

Postby scythe » Fri Feb 09, 2018 3:17 am

Those 220Vac LEDs are a good price and the twist lock power cords are an interesting idea.
Photos don't load for me.
scythe
 
Posts: 1860
Joined: Thu Nov 14, 2013 6:34 am
Location: Central West NSW
equipment: Dreaming of a 4" bubbler

PreviousNext

Return to The Dunder Pit



Who is online

Users browsing this forum: No registered users and 9 guests

cron

x