scythe wrote:So essentially its just a packed column and you can switch between fast or slow output (VM fast and LM slow).
Not a bad idea really.
Wonder how fast the VM side of it could go while maintaining over 80%ABV?
davesims wrote:scythe wrote:So essentially its just a packed column and you can switch between fast or slow output (VM fast and LM slow).
Not a bad idea really.
Wonder how fast the VM side of it could go while maintaining over 80%ABV?
Hey man, you got it in one, it is a LM'VM combo, effective a boka or version of as well as VM i have read up on people using the LM side for fores and heads then the VM side for hearts
davesims wrote:davesims wrote:scythe wrote:So essentially its just a packed column and you can switch between fast or slow output (VM fast and LM slow).
Not a bad idea really.
Wonder how fast the VM side of it could go while maintaining over 80%ABV?
scythe wrote:Wouldnt you want to do it the other way around tho.
Bleed the fores and heads off slow to make sure the column stacks properly and you get them all then open it up a bit and get the good stuff.
I suppose it gives you an option for stripping a wash as well.
Sam. wrote:Bleed heads with the LM nice and slow.
Collect hearts with VM and it should stop producing near the end of hearts on its own.
Rip tails off with LM if desired.
There not a bad still but I would go 3 inch minimum for speed. :handgestures-thumbupleft:
Sam. wrote:I reckon it will work as long as your condenser can knock everything down :handgestures-thumbupleft:
Users browsing this forum: No registered users and 57 guests