Oldhoon wrote:2" pot? please explain...
I'm pretty handy with making stuff etc and have all the tools to do so.
I'm excited already and have only been reading up on this hobby :obscene-drinkingdrunk:
BM
Doubleuj wrote:G’day mate and welcome, I ran a t500 for a couple of years, it’s not a bad rig, just slow.
Definitely replace the plastic tube but the stainless saddles will be fine :handgestures-thumbupleft:
I wrote up a few tips for running a t500 that might help, click here
Oldhoon wrote:The plastic tube I’m referring to is the one small loop on the top of the condenser
I was going to use some small copper pipe 5/16
XM
Professor Green wrote:Oldhoon wrote:The plastic tube I’m referring to is the one small loop on the top of the condenser
I was going to use some small copper pipe 5/16
XM
The loop of plastic tube at the top just carries condenser water. I think if you try to solder copper up there you'll melt the other plastic parts. Doubleuj is referring to the plastic pipe that comes with the T500 and connects to the spirit outlet to deliver it to your collection vessels.
Cheers,
Prof. Green.
Mattq71 wrote:Hi Oldhoon,
I am also Perth (North of River) with a brand new copper T500.
Did you do anything special with respect to cleaning prior to your first run ?
How did you first run turn out ?
Did you just do a sacrificial run as your first run or did you end up drinking it ?
Cheers
Matt
Users browsing this forum: No registered users and 69 guests