by brisvalleymoonshiner » Fri Feb 02, 2018 5:54 pm
Afternoon/evening all
before i crank this thing up for the 1st time just want to get the experts advice for anything i have missed. I have the water inlet for the def at the top and outlet at the bottom. Same for the condenser. The boiler has 2 2400w elements, my plan is to run with a vinegar/water mix to clean it then TPW i have packed section filled with stainless scrubbers, they seem to slide down to the top of the copper section below not sure if i have not put enough scrubbers in?? once it gets up to boil shut 1 element off and basically follow macs post on how to run a bubbler with full re flux for approx 20 min then slowly shut the def off and let it all come over to the condenser trying to have a toothpick size stream flow out of the condenser. If i have missed anything please chime on in with any advice not matter how picky
Cheers
You do not have the required permissions to view the files attached to this post.