Hi Guys,
Being playing with the idea of using a corny for storage as i have a heap (9) for my beer.
Was thinking of making an all in 1 system transferable & interchangeable.
Aeration of finished spirits using something like this
https://www.keg-king.com.au/carbonation ... stone.htmlGas quick-connect on the aeration lid on a hose to a small air pump something like this
https://www.target.com.au/p/bestway-sid ... p/58980521Turn the corny gas inlet (with short dip tube) into a tap using
https://www.keg-king.com.au/5-8-to-19-3 ... .html.html &
https://www.keg-king.com.au/5-8-stainle ... .html.html.
Leave the beer out line as is with long dip tube and ball lock post.
During aeration connect pump to stone and open gas tap for relief.
During storage disconnect pump and close tap. (Remove aeration lid and replace gas ball lock post for longer storage)
To pour connect liquid quick connect with silicone hose to beer out, connect air pump and close gas tap to push out (or straight onto gas ball lock post).
Beauty of the idea is all connected parts are external interchange so i can move aeration & tap from keg to keg and switch between beer & spirit with no irreversible damage and not comprimising contents. Can also purge with CO2 if i ever felt the need.
Can someone please flaw my logic??
thanks