bluc wrote:Be extremely careful cutting with grinders or welding old lpg or petrol tanks or kaboom :law-policered: :scared-eek:
RC Al wrote:Mate, go a stainless drum from a dryer or washing machine, ppl sell em on gumtree for exactly this purpose.
Full of holes and open at the top already
Braver man than me if you want to use it while stillin %-( :law-policered:
woodduck wrote:Or get one of these
woodduck wrote:Or get one of these
woodduck wrote:Or get one of these
db1979 wrote:woodduck wrote:Or get one of these
The mother duck's on a bit of a lean mate :teasing-tease:
bluc wrote:Were im from we used to burn a wood called gidgee. We hit a 44gallon drum with an axe kinda even round circumference. Then bend one side in so incoming air was swirled bottom half of drum used to burn red hot lovely on a cold night. Used to semi melt the drum and it would sag outta shape. Man it used to burn hot no problem melting a beer bottle into a blob..
shortcut wrote:I made a couple of those gas bottle wood burners you were asking about. I kinda loosely copied ones you can buy called “Ozpig”. Also you can make them from small hot water tanks. I took out the flyscreen in one of the shed windows and cut a sheet of gal with 150mm hole in it. I’ve got a chimney with a dogleg in it that pokes out the window through the hole.
Tried to put up photos but they are too big I’ll try and sort it out. I am shit at computers.
Users browsing this forum: Pour Decision and 2 guests