Hi from Tasmania

Say Hi and introduce yourself

Hi from Tasmania

Postby Davefid » Sun May 27, 2018 5:44 pm

Hi Everyone. My name is David and I am from Tasmania. I have bought a T500 copper still. Have had my first turbo wash on for about 3 days but have already decided to use a TPW as my sister in law uses this method and recommends it after also using a turbo wash.
I didn't take a starting SG but I will take a finishing SG.
Any help is good help. T.I.A
Davefid
 
Posts: 11
Joined: Sat May 26, 2018 11:57 pm
equipment: T500 copper condenser

Re: Hi from Tasmania

Postby woodduck » Sun May 27, 2018 5:57 pm

G'day Dave, welcome :greetings-waveyellow:

Hope you enjoy the new hobby. Have a good read of the newbies corner and most of the questions you might have are probably already answered. If not ask away.

Good luck
woodduck
Lifetime Member
 
Posts: 3497
Joined: Mon Jun 16, 2014 5:54 pm
Location: Good old country SA
equipment: 4 plate 6" copper bubbler, 6 plate 4" glass bubbler with 500mm packed section three way thumper sitting on a 50 ltr keg boiler with 6000watts, 2" pot still and a 2" boka.

Re: Hi from Tasmania

Postby Davefid » Sun May 27, 2018 6:23 pm

Thanks woodduck. I have been looking through a few of the threads so far and seem to be learning a little bit already.
Davefid
 
Posts: 11
Joined: Sat May 26, 2018 11:57 pm
equipment: T500 copper condenser

Re: Hi from Tasmania

Postby woodduck » Sun May 27, 2018 6:37 pm

Try the links in my signature below, some handy threads there.
woodduck
Lifetime Member
 
Posts: 3497
Joined: Mon Jun 16, 2014 5:54 pm
Location: Good old country SA
equipment: 4 plate 6" copper bubbler, 6 plate 4" glass bubbler with 500mm packed section three way thumper sitting on a 50 ltr keg boiler with 6000watts, 2" pot still and a 2" boka.

Re: Hi from Tasmania

Postby Professor Green » Sun May 27, 2018 7:51 pm

Welcome to AD mate.

There's a great thread here that will help you get the best from your T500.

Don't waste your turbo ferment, when it's finished, you can run it through your T500 and treat it as a learning/cleaning run.

Cheers,
Prof. Green.
Professor Green
 
Posts: 2553
Joined: Fri Apr 17, 2015 1:10 pm
Location: Victoria
equipment: FSD 100 litre milk can with 2 x 2400W elements
FSD Neutraliser
FSD Carter Head
12 litre double boiler with 2400W element

Re: Hi from Tasmania

Postby Davefid » Sun May 27, 2018 8:23 pm

Hey Prof Green, thanks for the tip, i had already read than link and i will try it out. appreciate the help.
Davefid
 
Posts: 11
Joined: Sat May 26, 2018 11:57 pm
equipment: T500 copper condenser

Re: Hi from Tasmania

Postby Doubleuj » Sun May 27, 2018 8:30 pm

Gday David, welcome to the forum :handgestures-thumbupleft: :greetings-waveyellow:
Doubleuj
Lifetime Member
 
Posts: 3630
Joined: Fri Jan 16, 2015 7:15 pm
Location: rockhampton qld
equipment: 4" stainless glasser


Return to Welcome Centre



Who is online

Users browsing this forum: No registered users and 4 guests

x