by RC Al » Thu Aug 02, 2018 3:46 pm
I'm getting good results by doing 1.5 washes - you use wash to water down the stripped product.
It may work on the t500, can't hurt to try - just run it as fast as possible to strip (without melting anything), on the spirit run run as normal for fores and heads, then faster for the rest, the hearts and tails will smear a bit, this is where you will get the flavour through, the hearts cuts probably won't be huge.
Give it a go, the worst thing that could happen is you get some flavorless neutral or something to run again normally for neutral