hillzabilly wrote:The turbo I would use all of for a cleaning and sac testing run,that way you will know how she runs with a full proper load,temps boil time etc,and keep whats collected separate so you can compare to the TPW.Let the TPW clear well and run that slow after rinseing the colomn from the turbo wash,and compare the two side by each.cheers hillzabilly :handgestures-thumbupleft:
hillzabilly wrote:No worries,I also donot recommend drinking spirit from cleaning runs,just to be safe.cheers hillzabilly ;-)
crikko wrote:Hoping someones lurking. Not sure what to do. Waters coming out through the temp probe hole and i cand find anything about what to do! Can i just put some silicone or something on it?
hillzabilly wrote:Hey mate,have used that when I started out,had one or two that did clear out befor 24hrs,a general rule is clearer the better for neutral,and ifn that means a day or two more then that is the smart choice,running early and mucky wash makes it hard for ya still to do its job and quality will fall,even if ya run it slower to compensate.Also mucks up ya packing resulting in a longer clean up after the run.I do not use it anymore and save $ every brew,and have learnt that patience is better road ta great spirit.cheers hillzabilly ;-)
bluc wrote:Lots washs you get away with some sediment yeast etc in boiler but not neutral. Cleaner the wash the better. Alcohol is a strong solvent and a small amout of flavoured material goes a suprisingly long way..
Return to Distillation for beginners using HBS products
Users browsing this forum: No registered users and 0 guests