Andrew wrote:Hi Ned.
Thanks for the chat today it was great to talk to somebody as inventive as yourself
I found an old thread in the 5star forum viewtopic.php?f=56&t=8260
We can talk later if need be :handgestures-thumbupleft:
Prof Green’s final words may be your best bet, an easy fix.
Cheers
Andrew
Professor Green wrote:I know the 50 litre milk can is a little shorter than my 100 litre one but I think you'll struggle to fit a full neutraliser into 2400mm even with a blockhead. All is not lost though. I run mine with 4 plates and strip my wash first. My current strategy is to strip 2 x 90 litre washes using a 4" pot setup then, combine the low wines and then run them though 4 plates with packed section.
My column set up is as follows (top down)
Blockhead (5 x 2 Tee)
RC
Packed section
SG Tee
SG Tee
SG Tee
SG Tee
100mm TC pipe (with recess for the bubble plate)
100 milk can
Bunnings dolly (approx 100mm high)
This all fits into my 2400mm shed with 5mm to spare. The reason for the dolly is to get the bottom of the drain tap high enough off the ground to be useful.
I have to say the neutraliser is the muts nuts and if you're considering one but are worried about the height, go with a similar configuration and run strategy to mine and you will not be disappointed.
Hope this helps you out Ned.
Andrew wrote:Hi Ned.
Thanks for the chat today it was great to talk to somebody as inventive as yourself
I found an old thread in the 5star forum viewtopic.php?f=56&t=8260
We can talk later if need be :handgestures-thumbupleft:
Prof Green’s final words may be your best bet, an easy fix.
Cheers
Andrew
r1zzla wrote:or you can make a shed roof extension .....
i can fit in 6 bubble tees and 500+100packed sections
Ned wrote:Admin delete if notappropriate.
Andrew this is the converted front loader washing machine, that I was telling you about. I can do 7 kg of grain at a time.
bluc wrote:Do you have more info on your malting machine? I am sure others would be interested also :handgestures-thumbupleft:
The Stig wrote:I think that malt maker needs its own thread and many words and pics :handgestures-thumbupleft:
RC Al wrote:Im reminded of the Mr Fusion on the Back to the Future DeLorean :D
That looks awesome, looks like it would work, well done!
Professor Green wrote:I love the fact that it has an unhappy robot face smack in the middle of it!
Return to Plated Column Stills
Users browsing this forum: No registered users and 77 guests