by RC Al » Wed Dec 12, 2018 12:19 pm
A triclamp to the condenser will let you use it on a neutral still at a later stage
A baffle or three in the condenser will make it more efficient - let you strip faster
The condenser full of water will be heavier - you may want to lengthen the riser above the 45 for balance, also a shorter riser from the lid will make it harder to tip, lower centre of gravity - maybe swap those 2 pieces?
As you have it, the only piece on the still usable for something else is the spool from the lid to the 45, if you dont want to wait for another clamp, consider swapping the clamp below the 45 to the condenser, that bottom join will be easier to retrofit with a clamp than one on the condenser