While I was building my PC the other day I thought I'd have the camera running and show you blokes how I build them. It might be helpful for anyone thinking of building one.
There's 3 videos all up, an intro/part 1, finishing off/part 2 and one on how to draw and make the end plates. About 40 mins all up. They might be a little long but I thought it was important to show how long it takes to solder stuff up so to know if your traveling ok and it can take a while.
First up I would like to thank this forum for it's massive knowlage resorce that allowed me to start building stuff like this. If it wasn't for the great blokes here posting their trade secrets, especially Mac, I would never have built any still. This tutorial is nothing new, I learnt it from mac's thread here http://www.aussiedistiller.com.au/viewt ... =41&t=3087
I just put it in a vid and just hope I did it justice.
Some things I should mention are,
If your doing the easy flange, solder the ring on before the end plate.
Cut your plates bigger than needed with tin snips them use a grinder/file to get them to a neat fit.
This method will work on 2,4 and 6" pipe maybe others and is the same for building RCs aswell.
If your holes and or plates are too small just hammer around the hole or edge to spread the plate to size.
Thats about it for now any questions let me know :handgestures-thumbupleft:
https://youtu.be/4aZ4Ls2_gL8
https://youtu.be/KAMMfUmP-Qc
https://youtu.be/QfI6A-JnSK8