Is there a formula to determine the tubing size between the Product Condenser and your collection jars? I never thought about it until I discovered I had used most of my 12mm tubing and already built a 2" to 12mm reducer and only had short lengths left. I have 12mm to 10 mm reducers and 10mm tubing.
I will be using my condenser in both 2" Pot and Reflux modes. I have a 2" Shotgun 500mm long with 4 X 12mm tubes inside.
I've read a ton of stuff over the past few days and haven't seen anything except for the speed of output. Drips and pencil thin streams and so many MLs per minute.
I know someone out there has seen something or a majority of you use a certain size output tubing. Is there a reason?
Maybe I'm just over thinking. I read something about syphoning or change in vapor pressure and it could be caused by a vacuum caused by to much restriction at or after the condenser.
I need some advice please.
Dan