Would a cornflake mash ( stripped but no spirit run yet) be ok for a gin neutral if I run it through a T500? Will run through a pot still for the gin run.
Started on TPW; WPOSW for me now; super simple, quick and so clear after the ferment, I can just pour it into the boiler (leaving the dregs at the bottom)
I have tried Odins gin 3 times with a TPW but did not like the result (may not have been hard enough on my cuts as it taste very woody) I have 5 gen of CFW stripped and will clean some of that through the T500 and give Odins gin another try.
I've done tffv and weetbix wash through by bubbler with packed section and so far the weetbix wash has given me a better neutral but I'm not confident I was consistent on my cuts for both runs. I'll need to do some more experiments. Damn, experiments... What a pain 8-} :dance:
Location: South of the big smoke in banana bender land.
equipment: Eve - 4" x 4 plate solid state bubbler (sieve plates), 330 mm packed section on a keg boiler with 2 x 2000 W elements. Currently having a makeover: 2" x 4 plate solid state bubbler (1" bubble caps, no sight glasses...maybe not for much longer!) on a bain-marie boiler.
I only do UJ corn wash and take the tails down to to 45-50% and carbon filter them before i use for vodka/neutral/gin. I find carbon is the greatest stuff up fixer upper/preventer you can get when you need a really neutral wash for something like gin. You dont need to if you take really good cuts but with a good filter you cant beat it for neutral and something like gin. Big fan of odins gin but i add a bit more citrus as i like those refreshing notes.
equipment: 180 litre fermenter x 2 30 liter boiler PDA-1 2" four plate modular bubbler 2" one meter long LM column 110 liter boiler with 25 liter (max) inline thumper 4" x 4 plate bubble cap still
:text-+1: on WBAB for a gin base if you don't like TPW. If it tastes woody though it may not be the base. how long did you macerate the botanicals for? What botanicals did you use? Were they freshly bought and from where?
I macerate juniper berries from Adelaide central market, coriander seeds from Garganis on South Rd Adelaide fresh, tangerinee and then blood range peel when tangerine went out of season as per Odins easy gin recipe. Macerate about 20 hours before run
It’s possible that there was still too much pith. I use a zester to take only the zest rather than trying to remove the pith after peeling. It is also possible that you ran too far into tails I suppose.
I dont own a zester but a sharp knife to slice the outer layer from the intact fruit works well too rather than removing it after the fruits been peeled. I then freeze any extra in zip lock bags.
equipment: 180 litre fermenter x 2 30 liter boiler PDA-1 2" four plate modular bubbler 2" one meter long LM column 110 liter boiler with 25 liter (max) inline thumper 4" x 4 plate bubble cap still
equipment: 4", 4 plate "Frankenfurter" copper bubbler and blockhead on a 50L 3000W electric boiler, 10000W controller - don't even know why I need that much, all grain HERMS system through 18G HLT keg and 50L mash tun.