by LikkerSheWillLoveIt » Thu Dec 31, 2020 8:29 am
Hello folks,
Well, after some good advice on this page and much deliberation and scouring the interwebs for design ideas and drawings, I think I have found the design for my next still. I’ll be starting mid January after when my stainless supplier is open.
The only thing I would (possibly) change is the size of the reducers up too 7/8” or 22.2mm, as I have read that flooding the reducer tube is a possibility? Please feel free to correct me if I’m incorrect.
All stainless build, purge welded using the copper saddles I already have for packing and of course a copper double wound condenser.
I’m thinking of using an FSD 2” sight glass tower to house the condenser, let’s face it, we all like to watch! Also thinking of Nitto fittings for water connections.
I’ll build a new keg boiler as well.
Here is the design I’ve decided on, please keep in mind it will be Stainless, TIG purge welded so it won’t have all the “sleeves”. Feel free to pick it apart or point me in the direction of another design
Cheers,
Trent.
You do not have the required permissions to view the files attached to this post.