Wire bracing

Posts in this forum should be a complete method, educational, with pics where applicable,posts made in this area that don't fit this criteria will be moved at mods discretion.

Wire bracing

Postby bt1 » Fri Feb 15, 2013 7:08 pm

Howdy,

Allways been somewhat taken with the SS wire bracing systems I've seen use on some minor building renos. The kind that has a lattice of tensile SS wire used to add a distinct look and some structural element to handrails, dividing fences, walkways etc.

More a trades question so please chip in if your familiar with this stuff.

I'd like to add a thin SS wire bracing for looks to my new column. I've found SS wire and crimps from fishing tackle places that looks to be the goods but I can't determine quality or grade btw.

Is there a guru supplier for this type of stuff? Really would like to have a chat before deciding.

Also can you get "mini" tensioners to suit small wire diameters?

cheers
bt1
bt1
 
Posts: 2448
Joined: Sun Apr 22, 2012 11:56 am
Location: Adelaide
equipment: 2 x Glass Bubblers, 5 plate 89mm & 6 plate 110mm
4" 6 plate copper bubbler, 500mm copper packed section
Several pots, custom boiler
14 keg rotating brew setup, fermentation & dispenser fridges.

Re: Wire bracing

Postby kelbygreen » Fri Feb 15, 2013 7:15 pm

Done a few wire balustrading. So cant comment on the smaller wire.

But it is used where there is contact with salt air all the time so its usually a good grade they do tarnish but if looked after should stay good.

What do you plan to use it for? as seems a bit of a pain on a still as you will need swagers and a swager clamp unless you use like a bolt up u shaped rod but that would look like crap
kelbygreen
 
Posts: 191
Joined: Sat Sep 22, 2012 4:19 pm
Location: Newcastle
equipment: 3" pot

Re: Wire bracing

Postby crow » Fri Feb 15, 2013 7:28 pm

There are a few different systems for tensioning these. I haven't done any for yonks but one is turn buckle system and the other is, well I don't know what its called but the cable is connected to a threaded pin and that screws into a female threaded tube. you would have to talk to a building supplier to get them I'd think. A real building supplier like bianco's not bunnings and the like
crow
 
Posts: 2363
Joined: Tue Mar 13, 2012 1:44 am
Location: Central Highlands Victoria
equipment: ultra pure reflux still and a 4" 4 plate MacStill built copper bubble cap column and a 500mm scoria packed rectifying module

Re: Wire bracing

Postby emptyglass » Fri Feb 15, 2013 9:44 pm

You could try here,
http://www.vicstainless.com.au/our-products.php?cat=1
Go to Our products>Stainless steel>Balustrad fittings.

You can hire crimpers, swagers, etc.
emptyglass
 

Re: Wire bracing

Postby Kimbo » Sat Feb 16, 2013 12:31 am

2013-02-15 22.30.45.jpg
And Shop fitting suppliers mate, there is a shop shelving system like this. The tall Aluminium piece is a tentioner, the other is a clamp which holds the cable and plate. the cable is about 2-3mm diameter.
You do not have the required permissions to view the files attached to this post.
Kimbo
Lifetime Member
 
Posts: 5461
Images: 0
Joined: Fri Mar 18, 2011 6:33 pm
Location: Perf WA
equipment: 4" bubbler with a 6"inline thumper

Re: Wire bracing

Postby Aussiedownunder01 » Sat Feb 16, 2013 6:52 am

Bunnings also have the said stainless steel wire
Aussiedownunder01
 
Posts: 1133
Joined: Tue Sep 11, 2012 7:25 am
Location: So close to melbourne airport you can hear the plains
equipment: 100 litre boiler with a 4 in 5 plate bubbler on top with a 500 packed section standing by if needed

Re: Wire bracing

Postby bt1 » Sat Feb 16, 2013 6:56 am

Many thanks all,

much appreciated I've got a clearer picture now, see how we go.

never ceases to bloody amaze me the width of experience of ppl on this site across heaps of areas...It's a real bonus!

cheers
bt1
bt1
 
Posts: 2448
Joined: Sun Apr 22, 2012 11:56 am
Location: Adelaide
equipment: 2 x Glass Bubblers, 5 plate 89mm & 6 plate 110mm
4" 6 plate copper bubbler, 500mm copper packed section
Several pots, custom boiler
14 keg rotating brew setup, fermentation & dispenser fridges.


Return to Tips From The Workbench



Who is online

Users browsing this forum: No registered users and 5 guests

x