Hi All,
I have a 3" column with a 12" and a 20" section. I bought a 30' roll of copper mesh. I cut it in two 15' lengths before I read that 10' lengths are right roll size. What I did last week was run in pot still mode and I just put a single 15' length rolled in a cone and put the narrow section pointed down thinking that it would drip down the center better. I want to run in full column mode now. Should I use two cones or three rolls (10' + 10' + 2x5'). I do have 4 copper scrubbies as well.
TIA,
Bod