Hill wrote:OG - FG = ? /7.46 = ABV
Hill wrote:OG - FG = ? /7.46 = ABV
newbiboozer wrote:It says it has an Electrophoresis coating for maximum corrosion resistance
MacStill wrote:MARCH PUMP EBAY
SPECIFICATIONS
Max Flow: Up to 19L/min
Max Head: up to 3.4meters
RPM: up to 3000rmp
Voltage: 220-240v AC
Frequency: 50-60hz
Power Consumption: 25 watts
Kimbo wrote:MacStill wrote:MARCH PUMP EBAY
SPECIFICATIONS
Max Flow: Up to 19L/min
Max Head: up to 3.4meters
RPM: up to 3000rmp
Voltage: 220-240v AC
Frequency: 50-60hz
Power Consumption: 25 watts
Yep, that's the one I got too :handgestures-thumbupleft:
newbiboozer wrote:Just a couple more questions.
1. Do you pump hot water over the grain once its drained to rinse the last out of it.
2. How do you get all of the spent grain out of the esky once you are done.
3. Is brass and plastic ok for use in a tunn or is it just stainless and copper.
MacStill wrote:newbiboozer wrote:Just a couple more questions.
1. Do you pump hot water over the grain once its drained to rinse the last out of it.
2. How do you get all of the spent grain out of the esky once you are done.
3. Is brass and plastic ok for use in a tunn or is it just stainless and copper.
1, you can do that, it lowers your ABV a little.... I didnt bother.
2, shovel and bucket, then tip and rinse.
3, I'm comfortable using those materials in a zero alcohol environment, others may have a different view.
sam_and_liv wrote:Pretty sure all PVC pipe is heat rated for hot water, I don't think plumbers would bury pipe under the ground that is going to melt :wtf:
Hava wrote:This is an awesome build! I'm going to have a crack at this design or a version of.
Two questions:
1 - Did you get the 815 or 809 March Pump or other?
2 - If you did this again, would you change anything?
Users browsing this forum: No registered users and 77 guests