Aussiedistiller, Home Distilling, Moonshine, Home Brew

Hi Everyone

What's the minimum amount of wash I should run as a sacrificial run for a new home built column? I have about 30 litres of a TPW ready to go but surely I don't need to waste all of it?

Thanks
Doogie

As long as no chance element is exposed should be OK.

wynnum1 wrote:As long as no chance element is exposed should be OK.

Sorry mate, don't understand?

doogie wrote:

wynnum1 wrote:As long as no chance element is exposed should be OK.

Sorry mate, don't understand?

You don't want the situation where as you distil the level in your boiler gets to your elements or they will blow with no liquid around them.

Can fill to above the element with water then put wash on top to make sure if your nervous.

I think he was looking for a litres type answer guys.

Maybe use 10 Litres of it mate, as if you have a t500 as per your list the elements are not exposed and I believe the turbo boiler even has a cut off switch.

I hope that helps

Wellsy wrote:I think he was looking for a litres type answer guys.

Maybe use 10 Litres of it mate, as if you have a t500 as per your list the elements are not exposed and I believe the turbo boiler even has a cut off switch.

I hope that helps

Thanks Wellsy, that's what I was after! :handgestures-thumbupleft: