ceramic boil enhancers

Just starting out and need some advise? then post it in here.

ceramic boil enhancers

Postby jman69 » Mon Apr 26, 2021 1:38 pm

just wondering, do ceramic boil enhancers become smelly after a few uses? Can they be cleaned? Also can anything else be used instead? ie: small pieces of copper? Lastly, can we store spirit in copper vessels in stead of glass? Thanks in advance.
Last edited by jman69 on Mon Apr 26, 2021 1:42 pm, edited 1 time in total.
jman69
 
Posts: 54
Joined: Sun Apr 14, 2019 6:57 pm
equipment: reflux

Re: ceramic boil enhancers

Postby Dude » Mon Apr 26, 2021 1:50 pm

I have not had any issue with the ones I use ( they came with the t500 ). I rinse them straight after use and leave them on a paper towel to dry in the bottom of the boiler.
Dude
 
Posts: 140
Joined: Sun Dec 06, 2020 7:19 am
equipment: Turbo 500. 50L pot still with 2 x 2400W heaters, shotgun condenser, reflux condenser. Building a cooling system.

Re: ceramic boil enhancers

Postby jman69 » Tue Apr 27, 2021 3:52 pm

That's what i do. i've not had any problems yet. I just read about it somewhere and was wondering if it was true? Thanks Dude.
jman69
 
Posts: 54
Joined: Sun Apr 14, 2019 6:57 pm
equipment: reflux

Re: ceramic boil enhancers

Postby RC Al » Tue Apr 27, 2021 9:58 pm

Copper is good, If your going to cut your own, rough them up and make them thinner than the diameter, you want as many edges as possible.

I use scoria currently, seems to work just fine

Long term storage in copper isnt a great idea with the potential for excess copper to leech in, stainless is a much better opton there and generally cheaper.
RC Al
Mentor
 
Posts: 1568
Joined: Mon Oct 23, 2017 4:58 pm
Location: Sunshine Coast Area
equipment: 3 plate 4" glasser
2" Potty

Re: ceramic boil enhancers

Postby jman69 » Wed Apr 28, 2021 3:58 pm

Thanks RC AL. I've been storing spirit in long neck beer bottles up till now with no problem. Was just wondering if a copper vessel happened to come along at some point. I have a bit of thin copper sheet in the shed,old hot water tank, do you think a handfull of thin cut strips would make good boil enhancers instesd of ceramic?
jman69
 
Posts: 54
Joined: Sun Apr 14, 2019 6:57 pm
equipment: reflux

Re: ceramic boil enhancers

Postby The Stig » Wed Apr 28, 2021 5:46 pm

You can clean ceramics with Sterident tabs , I used them on my T500 packing
The Stig
Site Nerd
 
Posts: 18214
Images: 9
Joined: Sun Jun 19, 2011 8:37 am
equipment: Only the Best will Do.
Mac4 SSG Bubbles of Joy

Re: ceramic boil enhancers

Postby RC Al » Wed Apr 28, 2021 7:45 pm

I wouldnt go cutting up a tank for that, if its already cut up a bit, then yeah sure
RC Al
Mentor
 
Posts: 1568
Joined: Mon Oct 23, 2017 4:58 pm
Location: Sunshine Coast Area
equipment: 3 plate 4" glasser
2" Potty

Re: ceramic boil enhancers

Postby The Stig » Thu Apr 29, 2021 6:23 am

Smash an old tea cup or glass or add some marbles before cutting good copper
The Stig
Site Nerd
 
Posts: 18214
Images: 9
Joined: Sun Jun 19, 2011 8:37 am
equipment: Only the Best will Do.
Mac4 SSG Bubbles of Joy

Re: ceramic boil enhancers

Postby jman69 » Thu Apr 29, 2021 4:13 pm

The tank is already cut up, it's been hanging around in the shed for years. Also, i already use a sterident and white vinigar solution to clean my copper saddles, it works well.Thank's fellas.
jman69
 
Posts: 54
Joined: Sun Apr 14, 2019 6:57 pm
equipment: reflux

Re: ceramic boil enhancers

Postby The Stig » Thu Apr 29, 2021 4:35 pm

Copper in the boiler won’t hurt but also won’t make a difference , copper need to be in the vapor path not in the boiling liquid to be effective .
That’s why ceramic, glass or anything inert will work
The Stig
Site Nerd
 
Posts: 18214
Images: 9
Joined: Sun Jun 19, 2011 8:37 am
equipment: Only the Best will Do.
Mac4 SSG Bubbles of Joy

Re: ceramic boil enhancers

Postby jman69 » Fri Apr 30, 2021 7:03 pm

Rito Stig mate, ceramic it is. :handgestures-thumbupleft:
jman69
 
Posts: 54
Joined: Sun Apr 14, 2019 6:57 pm
equipment: reflux


Return to Beginners Questions



Who is online

Users browsing this forum: chipboy and 38 guests

x