methanol???

Discuss safety issues here.

methanol???

Postby jackmankelow » Mon Nov 25, 2013 9:07 am

I have been wanting to make my own alcohol and decided to start cheap..... I made a mixture of yeast sugar and water and left it to ferment. I then distilled it in an improvised pot still..... is there going to be a lot (if any) methanol in it??
jackmankelow
 
Posts: 10
Joined: Sat Sep 28, 2013 5:38 pm
Location: Morrinsville, New Zealand
equipment: small 10LPot Still. I am hoping to upgrade soon!

Re: methanol???

Postby JayD » Mon Nov 25, 2013 9:14 am

here's a guide on how to do your Cuts once you master this part of distilling it will help you in keeping only the best from your run.
JayD
 
Posts: 1669
Joined: Mon Jul 09, 2012 7:46 pm
Location: Tasmania
equipment: JayD's Copper Worx

Re: methanol???

Postby jackmankelow » Mon Nov 25, 2013 9:20 am

thanks for that :)
jackmankelow
 
Posts: 10
Joined: Sat Sep 28, 2013 5:38 pm
Location: Morrinsville, New Zealand
equipment: small 10LPot Still. I am hoping to upgrade soon!

Re: methanol???

Postby SBB » Tue Nov 26, 2013 8:06 am

You would be better off looking in the Tried and Proven section of the forum for a wash recipe, Yeast, water and sugar will make alcohol. but what will it taste like?
SBB
Lifetime Member
 
Posts: 2450
Joined: Mon Mar 21, 2011 8:12 pm
Location: Northern NSW
equipment: (The Pelican) a 2 inch pot / stripper on 25L electric boiler interchangable with T500 reflux still...... 2 1/2 inch pot still on 50L keg (gas burner).....
3 inch Boka (half share with Draino),...... 4 inch 4 plate perforated plate Bubbler

Re: methanol???

Postby grehund » Tue Nov 26, 2013 11:06 am

+1 to SBB's comment.

I would do a bit more reading first, but that's just me.

Are you measuring the Specific Gravity of your wash? How do you know it's finished fermenting & ready for distilling?

You need to make sure you're getting rid of foreshots. The Cuts post will tell you all about that.

I suggest you try the Tomato Paste Wash in the Tried and Proven section. You'll probably want to run it through your pot still at least a couple of times though.

Enjoy. :handgestures-thumbupleft:
grehund
 
Posts: 90
Joined: Thu Aug 04, 2011 6:22 pm
Location: SE Victoria
equipment: 4-plate 4" Bubble Cap
50L Keg Boiler, 2x 2.2kW Elements (1x Voltage Controller)
STC-1000 Temp Controlled Fermentation Fridge

Re: methanol???

Postby crow » Tue Nov 26, 2013 11:50 am

Your using a pot still yeah? If so just forget any wash to make a neutral full stop, just to much work to get a decent neutral with a pot still. Jump in feet first with a whiskey or rum and you'll never look back
crow
 
Posts: 2363
Joined: Tue Mar 13, 2012 1:44 am
Location: Central Highlands Victoria
equipment: ultra pure reflux still and a 4" 4 plate MacStill built copper bubble cap column and a 500mm scoria packed rectifying module

Re: methanol???

Postby Yummyrum » Tue Nov 26, 2013 4:50 pm

All the advice so far is correct ....but to answer your last question
jackmankelow wrote:.. is there going to be a lot (if any) methanol in it??

No there is very little if any Methanol in a pure white sugar wash .......fruit washes on the other hand do produce lots.

But .....Always remove the first 150ml at least in a pot still with a 25 liter wash just to make sure .What comes out after that won't make you blind but may give you a thumper .

Out of interest ,I got to smell some methanol from a Lab the other day .It smelt like a cross between Fish and Rubber......never had anything that smelt like that come out of my still .......get lots of acetone though
Yummyrum
 
Posts: 1897
Joined: Fri Dec 28, 2012 3:19 pm
Location: Near Coffs
equipment: Did use Still Spirits Reflux
Now use 50l Keg with Pot head for Rum and Neutral stripping runs on gas .
LM/VM head with 1m packed 2" on Still Spirits boiler for Neutrals.

Re: methanol???

Postby SBB » Tue Nov 26, 2013 7:42 pm

crow wrote:Your using a pot still yeah? If so just forget any wash to make a neutral full stop, just to much work to get a decent neutral with a pot still. Jump in feet first with a whiskey or rum and you'll never look back

Ive have to agree with Crow on this one, Your going to have a lot more luck making a nice rum or UJ using a pot than trying to make neutral.
The washes are no harder to make, maybe just a little more time sourcing ingredients.
SBB
Lifetime Member
 
Posts: 2450
Joined: Mon Mar 21, 2011 8:12 pm
Location: Northern NSW
equipment: (The Pelican) a 2 inch pot / stripper on 25L electric boiler interchangable with T500 reflux still...... 2 1/2 inch pot still on 50L keg (gas burner).....
3 inch Boka (half share with Draino),...... 4 inch 4 plate perforated plate Bubbler

Re: methanol???

Postby Yummyrum » Tue Nov 26, 2013 9:35 pm

jackmankelow ,
Recon you're dippin your toe in the distillin waters. Can see that "makeshift Pot still " evolving real soon :handgestures-thumbupleft:
Yummyrum
 
Posts: 1897
Joined: Fri Dec 28, 2012 3:19 pm
Location: Near Coffs
equipment: Did use Still Spirits Reflux
Now use 50l Keg with Pot head for Rum and Neutral stripping runs on gas .
LM/VM head with 1m packed 2" on Still Spirits boiler for Neutrals.

Re: methanol???

Postby jackmankelow » Wed Nov 27, 2013 5:57 pm

Thanks guys, found all your info really helpful!
jackmankelow
 
Posts: 10
Joined: Sat Sep 28, 2013 5:38 pm
Location: Morrinsville, New Zealand
equipment: small 10LPot Still. I am hoping to upgrade soon!

Re: methanol???

Postby jackmankelow » Wed Nov 27, 2013 5:58 pm

And do you have some recipes for rum I could try??
jackmankelow
 
Posts: 10
Joined: Sat Sep 28, 2013 5:38 pm
Location: Morrinsville, New Zealand
equipment: small 10LPot Still. I am hoping to upgrade soon!

Re: methanol???

Postby Sam. » Wed Nov 27, 2013 6:02 pm

jackmankelow wrote:And do you have some recipes for rum I could try??


Not looking real hard are ya bud? Try this
Sam.
Lifetime Member
 
Posts: 10405
Joined: Sun Jul 17, 2011 7:19 pm
Location: South Oz Straya
equipment: Original FSD 5 plate 4 inch modular bubbler SSG with hand crafted plates and parrot by Mac.
18 Gal boiler.
2 x 2400W elements and power controller.
.

Re: methanol???

Postby jackmankelow » Wed Nov 27, 2013 6:08 pm

I have found a lot of recipes for rum but there are heaps of different ones haha, I was wondering what (you think) is the best :)
jackmankelow
 
Posts: 10
Joined: Sat Sep 28, 2013 5:38 pm
Location: Morrinsville, New Zealand
equipment: small 10LPot Still. I am hoping to upgrade soon!

Re: methanol???

Postby Sam. » Wed Nov 27, 2013 6:45 pm

jackmankelow wrote:I have found a lot of recipes for rum but there are heaps of different ones haha, I was wondering what (you think) is the best :)


Don't ask me then I don't make rum :laughing-rolling:
Sam.
Lifetime Member
 
Posts: 10405
Joined: Sun Jul 17, 2011 7:19 pm
Location: South Oz Straya
equipment: Original FSD 5 plate 4 inch modular bubbler SSG with hand crafted plates and parrot by Mac.
18 Gal boiler.
2 x 2400W elements and power controller.
.

Re: methanol???

Postby MacStill » Wed Nov 27, 2013 7:06 pm

jackmankelow wrote:I have found a lot of recipes for rum but there are heaps of different ones haha, I was wondering what (you think) is the best :)


Reckon if you looked in the tried n proven section for the most popular rum topic you'd be narrowing it down a bit :teasing-neener:
MacStill
Lifetime Member
 
Posts: 16835
Joined: Fri Mar 18, 2011 1:40 pm
Location: Wide Bay QLD
equipment: Anything I choose :P

Re: methanol???

Postby jackmankelow » Wed Nov 27, 2013 7:08 pm

haha thanks :p
jackmankelow
 
Posts: 10
Joined: Sat Sep 28, 2013 5:38 pm
Location: Morrinsville, New Zealand
equipment: small 10LPot Still. I am hoping to upgrade soon!

Re: methanol???

Postby SBB » Wed Nov 27, 2013 7:09 pm

Try the Mac Rum , if ya don't like it try Hook Rum or Pugie Rum, Then there is Harrys GGGP rum they are all pretty well tried and proven and will make a top drop. Take your pick. if ya get bored there is white rum and spiced rum, Rum using backset and rum without. There are those that fiddle with PH and those that don't. Some use stock feed molasses other use flash expensive stuff, Its one of those kind of hobbies, experimentation never finishes.
What ever you end up doing if you oak it right and get your cuts right it will be excellent rum.
SBB
Lifetime Member
 
Posts: 2450
Joined: Mon Mar 21, 2011 8:12 pm
Location: Northern NSW
equipment: (The Pelican) a 2 inch pot / stripper on 25L electric boiler interchangable with T500 reflux still...... 2 1/2 inch pot still on 50L keg (gas burner).....
3 inch Boka (half share with Draino),...... 4 inch 4 plate perforated plate Bubbler

Re: methanol???

Postby MacStill » Wed Nov 27, 2013 7:14 pm

jackmankelow wrote:haha thanks :p


my :teasing-neener: is better than your :-P so :obscene-buttred:
MacStill
Lifetime Member
 
Posts: 16835
Joined: Fri Mar 18, 2011 1:40 pm
Location: Wide Bay QLD
equipment: Anything I choose :P

Re: methanol???

Postby Jinni_09 » Fri Dec 27, 2013 3:26 pm

Nice post!
Jinni_09
 


Return to Safety Discussion



Who is online

Users browsing this forum: No registered users and 13 guests

x