3” Product Condenser

[Crusty]

Happy New Year everyone.
I’m looking to upgrade my 2” product condenser to a 3” product condenser.
I’ve got 6,000w of power available on the 100lt boiler but this over powers the condenser on stripping runs.
The ideal speed to run the 2” on a neutral run is 2-2.5lthr collection rate which is perfect. What collection rate would I be looking at on a neutral spirit run with the 3”. I’m considering using the larger condenser for the strip & neutral spirit runs.
I’ve heard it’s ok to run it even quicker on coloured spirits.
Any of you guys running a larger condenser?

[bluc]

How much will your rc hold back? When doing neutral it plays a big part in how much you can stack into column allows slightly faster takeoff..How much you want for your 2" condenser 8-}

[Crusty]

How much will your rc hold back? When doing neutral it plays a big part in how much you can stack into column allows slightly faster takeoff..How much you want for your 2" condenser 8-}

Thanks buddy.
Not selling anything but just want to speed up the stripping runs.
My still is 4", 5 plate & am considering running the 3" product condenser for strips & spirit runs.
When tails arrive, I crank the still up but having the larger PC will allow me to utilise the 6,000w available to run it down to around 20%.
The most painful part of the spirit run for me is after tails arrive. I need to get it done.
I also have a 4" Whiskey helmet for the brown gear & the larger PC will come in handy for that too.

[Crusty]

Anyone on here running a 3” product condenser?

[The Stig]

Me on the 4” copper whiskey helmet :teasing-neener: :handgestures-thumbupleft:
4” down to 3” bends and PC

[Crusty]

Nice Stig.
I’ve got the 100lt milk can boiler with the 4” copper whiskey helmet, 4” down to 2”.
I’ll place an order as soon as I can for all the 3” components.
Cheers

[The Stig]

Everything’s in stock and ready to roll :handgestures-thumbupleft: